Cart 2 india

Specification
Brand : VPABES
BulletPoint : Bridgeport Milling Machine CNC Parts Table Lock Handle Silver 1/2 Thread Set
BulletPoint1 : 【High Quality Material】: This Coolant Spray System is made of plastic, metal to meet the needs of high hardness, high toughness and high stability. High safety factor, you can use it with confidence.
BulletPoint2 : 【Easy to Use】: The nozzle of the coolant spray system is easy to operate, which can save more than 8/10 of the processing coolant, and the cooling effect will not be reduced.
BulletPoint3 : 【Widely Used】: This cnc mister is suitable for 8mm air ducts of CNC lathes and milling machines.
BulletPoint4 : 【Sprayable Medium】: water, alcohol, coolant, engine oil, kerosene, cooking oil.
BulletPoint5 : 【No Water Pressure Required】: Coolant mist sprayer,1KG air pressure can be sprayed.
BulletPoint6 : 【AFTER SALES SERVICE】 If you get stuck, Contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.
ExternallyAssignedProductIdentifier1 : 0764769486801
ExternallyAssignedProductIdentifier2 : 764769486801
IncludedComponents : Slide base, Spindle fixing plate
IncludedComponents1 : sliding bearing block
IncludedComponents2 : M4 screws
IncludedComponents3 : T8 nuts
IncludedComponents4 : M4 Sliding nuts
ItemName : VPABES Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for 8Mm Air Air Pipe CNC Lathe Milling Drill
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 4 inches
ItemTypeKeyword : power-milling-machines
Manufacturer : LIQUTIYS
Material : Aluminum
Material1 : metal
Material2 : aluminum
Material3 : iron
ModelName : CNC Slide table
ModelNumber : CNC-3018-Z-2
NumberOfBoxes : 1
PartNumber : xichuang12A14-02
PowerSourceType : dc
ProductDescription :

Customers need to prepare their own air compressor (air pressure 2KG-8kg) connection for use;

How to use:

1. The gas pipe of the air pump intakes air from the air inlet marked IN the air filter. Air is released from the OUT outlet, and then connected to the solenoid valve with two copper mufflers on the end of the intake.

2. The complimentary blue gas pipe should be plugged into the AIR inlet connected to the sprayer from the end of the solenoid valve with a plug. One end of the complimentary transparent tubing is connected to the check valve on the tank and the other end is inserted directly into the OIL suction port of the sprayer.

3. Machine tool PLC access to the solenoid valve coil, using PLC program to control the opening and closing of the solenoid valve. Solenoid valve open, on the ventilation spray; The solenoid valve is closed, and the gas is not sprayed.

(If you want the power supply to work, you need to connect the PLC equipment or automatic signals to the solenoid valve:The connection method is two parallel in the solenoid valve coil, is connected to the positive and negative poles, the two contacts are not positive or negative. A separate contact on the side is grounded to prevent static electricity.

Product parameter：

Size：tank：24.1*19.5*12.5cm（9.49*7.68*4.92inch）

The electromagnetic valve：11.8cm（4.65in）

air filter：19.5cm（7.68in）

Weight：2.45kg（5.4lb）

Material：Fuel tank: resin material

         Fuel tank cover: A3 iron

         Sprayer, solenoid valve: aluminum alloy

         Air filter: iron shell + engineering plastic

packing list：

Pneumatic cooling spray*2

Solenoid valve*1

Air filter*1

ProductSiteLaunchDate : 2023-08-11T06:16:44.153Z
Size : Silver1/2
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 48 volts_of_direct_current
Wattage : 300 watts