Cart 2 india

Specification
Brand : AJDFVHJF
BulletPoint1 : High precision: micron level, improve product quality.
BulletPoint2 : High performance: Stable output, improve efficiency.
BulletPoint3 : Wide compatibility: Adapt to various machines.
BulletPoint4 : Durable and easy to maintain: high quality, simple maintenance.
Color : 7.5kw Er32 380v
ExternallyAssignedProductIdentifier : 7420791706975
ItemName : Spindle motor CNC Milling Machine Spindle Motor 7.5 KW ER32 Air-Cooled Spindle Without Mounting Flange 4 Bearing 18000rpm CNC Router Engraving(7.5kw ER32 380V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : AJDFVHJF
ModelName : AJDFVHJF
ModelNumber : AJDFVHJF
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : AJDFVHJF
ProductDescription : 1PC 220v 7.5kw ER3.2 air-cooled spindle motor without mounting flange 4 bearings
Model: GDF60-18Z-7.5
Speed regulation mode: change the spindle speed through the three-phase output inverter and adjust the frequency of the inverter.
Cooling method: air cooling
Power interface: optional 5-pin waterproof aviation plug. Aviation plugs are marked with "1", "2", "3", "4", "5", "GND". "1", "2", and "3" are connected to the inverter (U, V, W), and "GND" is connected to the inverter ground. )
Power: 7.5kw (1HP=0.735w)
Voltage: 380v (please leave a message if you need a 220v spindle, thank you)
Current: 15.0A
Frequency: 0-300Hz
Speed: 0-18000rpm
Torque: 3.98Nm
Jump close: less than 0.01mm
Shaft end connection: ER32-3.175-20
Bearing type: 2*7008C P4, 2*7003C P4 (4 ball bearings)
Chuck: ER32
Clamping tool diameter: 17mm, 16mm, 15mm, 14mm, 13mm, 12.7mm, 12mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 2.0mm, 2.0mm, 1.5mm , 1mm (standard 4mm)
Grease lubrication
Main use: Carving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals, and also can carve soft metal surfaces such as gold, silver, copper, aluminum, and lead. (Please note that this is a woodworking spindle, which can only be used for woodworking and aluminum products, not steel products. If you need steel products, please check the metal spindle, thank you!)
The working environment temperature of the spindle is usually -10~40.
Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular joint bearings can extend the life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coa
ProductSiteLaunchDate : 2024-08-07T01:56:59.952Z
Size : Square
UnitCount : 1