Cart 2 india

Specification
BaseType : Fixed
Brand : SARAL TOOLS
BulletPoint : ROTARY TABLE 100MM/4" WITH 100MM ROTARY VICE
BulletPoint1 : A very high quality low profile 75 mm /3" Rotary Table with 4 slots combines with our 3 jaw Self Centering 65 mm Lathe Chuck clamped on back plate.
BulletPoint2 : Overall height of the table is 42 mm (without chuck) & 95 mm (with Chuck)
BulletPoint3 : This Tailstock is mostly used in between our Rotary Table 3" , Rotary Table 3" Tilting, Rotary Table 4" , Rotary Table 4" Tilting and Rotary Table 4" HV4 Models.
BulletPoint4 : 【BALL SCREW】: Upgraded ball screw to make the machine more accurate and stable during operation, with reversibility, high efficiency and low frictional resistance.
BulletPoint5 : 【WATER COOLING】: The main shaft adopts water-cooled motor, which has low noise and water circulation cooling. It can work for a long time without affecting performance, and the machining accuracy is higher.
Color : 2200w
ExternallyAssignedProductIdentifier : 5203082784584
ExternallyAssignedProductIdentifier1 : 061016151049
ExternallyAssignedProductIdentifier2 : 0061016151049
IncludedComponents : 1 Pc x HV4 Rotary Table
ItemName : Rotary Table Tilting 3" w/65mm Lathe Chuck for MillingMachine With Tailstock
ItemPackageDimensions_Height : 11.9 centimeters
ItemPackageDimensions_Length : 5.9 centimeters
ItemPackageDimensions_Width : 8.7 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : power-milling-machines
Manufacturer : SARAL TOOLS
Material : Graded Cast Iron and Quality Steel
MaximumRotationalSpeed : 24000 rpm
ModelName : 3040CNC-2200-USB-4AXIS-S
ModelNumber : MCA-ER164RT
NumberOfPieces : 1
PartNumber : TH-3040CNCCNC4AXIS-2200-USB-S
PowerSourceType : Corded Electric
ProductDescription : Rotary Table Horizontal & Vertical 3" / 75mm with 65 mm Lathe Chuck for Milling Machine A very high quality low profile 75 mm /3" Rotary Table with 4 slots combines with our 3 jaw Self Centering 65 mm Lathe Chuck clamped on back plate. Overall height of the table is 42 mm (without chuck) & 95 mm (with Chuck) The worm gear ratio is 36: 1 which means 1 rotation of handle will turn the table by 10 degrees. The hand wheel is in 10 min division and can be set at 0. It is supplied with a Mounting Back plate, a set of T-nuts apart from Chuck Mounting on the Rotary Table. The table can be mounted both horizontally and vertically. An excellent finish quality product with wrinkle paint for a long life !! Tailstock This Tailstock is mostly used in between our Rotary Table 3" , Rotary Table 3" Tilting, Rotary Table 4" , Rotary Table 4" Tilting and Rotary Table 4" HV4 Models. It is used when between Centre Work is Required. These are adjustable for different heights & also having fine feed centre point and the centre tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use.
ProductSiteLaunchDate : 2018-02-07T08:00:00.000Z
Size : 3040
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 220 volts