Cart 2 india

Specification
Brand : ASSORTS
BulletPoint : SINGLE BOLT TAILSTOCK SUITABLE FOR ROTARY TABLE 3" / 4" & HV4
BulletPoint1 : Tool Set of 4" Regular Rotary Table with a suitable Tailstock & 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts
BulletPoint2 : Chuck Body is Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
BulletPoint3 : A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That It Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table.
BulletPoint4 : It Can Be Mounted Both In Horizontal & Vertical Position. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero.
Capacity : 65 millimeters
Color : Wrinkle Black Paint Finish & Ground Finish
CompatibleDevices : Milling Machine
ExternallyAssignedProductIdentifier : 8903562970809
IncludedComponents : ROTARY TABLE, CHUCK, BACK PLATE & FIXING T NUTS & tailstock
ItemName : Precision Horizontal Vertical Milling Indexing 4"/ 100 Rotary Table With Suitable Tailstock & Small Chuck & Fixing T Nut Bolts (With 65 Mm 3 Jaws Self Centering Chuck)
ItemPackageDimensions_Height : 26.3906 centimeters
ItemPackageDimensions_Length : 12.192 centimeters
ItemPackageDimensions_Width : 26.289 centimeters
ItemPackageQuantity : 4
ItemShape : As per Pitcher
ItemTypeKeyword : power-milling-machines
LockType : Self Centering
Manufacturer : ASSORTSMACHINETOOLS
Material : CASTE IRON BODY & ALLOY TOOL STEEL
ModelName : Rotary Table With Tailstock
ModelNumber : 34543
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : MRT-4R.70MMJ.4
PowerSourceType : Manual
ProductDescription : Description of 4" (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16" (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Supplied with a small Chuck, made from chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table.
ProductSiteLaunchDate : 2017-01-18T08:00:00.000Z
Size : 4"/100 MM ROTARY TABLE WITH SMALL CHUCK& TAILSTOCK
Style : WITH 65 MM 3 JAWS SELF CENTERING CHUCK
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500