Cart 2 india

Specification
Brand : Walfront
BulletPoint : 4500W (6HP) Water Cooled CNC Milling Spindle (KL-4500)
BulletPoint1 : Working Safer - Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up.
BulletPoint2 : Easy To Use - Air flow and spray mist volume adjustable design, easier to use.It is easy setup, shinny finishing for metal products. Flexible functions as cooling, lubrication and blowing the metal chips can be performed at the same time.
BulletPoint3 : Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.Designed and manufactured for improving machine ability, cutting speed, and extending tool service life, Saving working time and production cost.
BulletPoint4 : Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.Air flow is adjustable. Spray mist volume is adjustable. Extend the life time of the machine. Clean, reduce temperature well.
BulletPoint5 : Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.Good for metal processing. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing.
Color : Ground Finsing
CutType : Taper
ExternallyAssignedProductIdentifier1 : 741870011337
ExternallyAssignedProductIdentifier2 : 0741870011337
FinishType : Finish
IncludedComponents : inc
ItemName : Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for 8mm Air Pipe CNC Lathe Milling Drill
ItemPackageDimensions_Height : 36.7 centimeters
ItemPackageDimensions_Length : 4.8 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : power-milling-machines
Manufacturer : Walfront
Material : plastic & metal & brass
MeasurementSystem : Metric
ModelName : HV6 Rotary Table
ModelNumber : 350194
NumberOfItems : 1
PartNumber : Walfront58i0mu29tb
PowerSourceType : unknow
ProductDescription : Engraving machine spray cooling,Special design,direction of rotation,easy to operate. Standard fixing device,fine spray port, long life.A lot of water problem solving tools, easier to clean up,processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled,gas processing chips are blown away, working safer,the nebulizer gas and coolant is adjustable, easy to use on different processing conditions,Even the super-hard alloy preciseness machining the workpiece can achieve a smooth surface,not only increases the machining cutting speed, save time and reduce processing costs and tool wear.

Specification:
Material: plastic & metal & brass
Size:36 cm (L),hose about 1M
For 8mm air pipe 
For CNC Lathe Milling Drill Machine. 
Cooling stone / metal / ceramic tile engraving machine. 

Product Size: 
50 x 30 x 20mm / 2 x 1.2 x 0.8inch 
Hose about 1.5m 
Package Weight: 173g
Package Dimensions (L*W*H) : 228*177*30 MM 

Package Include: 
1 x Mist Coolant Spray System

NOTES:
1. Clean the liquid shall be used
2. Do not use liquid-corrosive
3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7 KGF / CM2
(atomization and gas, associated gas pressure)
4. Use the liquid viscosity at 68cSt or less



ProductSiteLaunchDate : 2018-04-24T02:51:08.419Z
Size : Large
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 0.01