Cart 2 india

Specification
BaseType : Fixed
Brand : ele ELEOPTION
BulletPoint1 : Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
BulletPoint2 : Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
BulletPoint3 : Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
BulletPoint4 : Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed
BulletPoint5 : Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.
BulletPoint6 : 9" long guide plates with three roller balls help feed the material through the cutter
BulletPoint7 : Rigidly mounts to any benchtop
Color : Orange
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6920836918000
ExternallyAssignedProductIdentifier1 : 731325401646
ExternallyAssignedProductIdentifier2 : 0731325401646
IncludedComponents : Beveling Machine
ItemName : Hengwei Power Feed Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill Fits Bridgeport Acer (450 in-lb X-Axis Torque)
ItemPackageDimensions_Height : 30.48 centimeters
ItemPackageDimensions_Length : 35.56 centimeters
ItemPackageDimensions_Width : 25.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Hengwei
Material : Aluminum
MaximumRotationalSpeed : 24000 rpm
ModelName : Baileigh Industrial - CM-10P; 110V Portable Beveling Machine, 0-10mm on Angles from 15 to 45 Degrees (1002391)
ModelNumber : CM-10P
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 1002391
Pattern : 1.5KW-6040
PowerSourceType : Corded Electric
ProductDescription :

Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill

AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8" Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Feature

Type: X traverse

Model: Al-310S

Voltage: 110V, 50/60Hz

Rotate speed: 0-200 RPM

Max torque: 450 in-lb

Max feed rate: 650mm/min

Max return speed: 850mm/min

Effortless operation

Noiseless direction changes

Better surface smoothness

Small volume and easy installation

Excellent speed control in the entire range

Power table feed won't vibrate or strain in low speed

Direction control knob for easy and rapid operation

Safety feature to protect transmission gear and electronic components

Warning

1. To stop jog operating, you must first turn “FEED KNOB” to “0”(OFF) position. Then move “JOG SWITCH” to “FEED” position.

2. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement.

Package Content

1 x Power Feed For Milling Machine

8 x Adjustable Pad

2 x Tiavel Stop Assembly

1 x Adapter

1 x Bevel Gear

1 x Dial Nut

1 x Locking Nut

1 x Product Manual

ProductSiteLaunchDate : 2019-03-31T07:00:00.000Z
Style : 8000rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27000000
Voltage : 110 volts