Cart 2 india

Specification
Amperage : 10.4 amps
BaseType : Fixed
Brand : FAHKNS
BulletPoint1 : Suitable Models: This power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end. model: AL-460, power: 90W, 110V; torque:450in-lb, input voltage: 50/60Hz, single phase; rotate Speed:0-200 RPM.
BulletPoint10 : Children-proof design & safe fillet processing technology, they are all to prevent metal parts from scratching the skin.
BulletPoint2 : Ergonomic Design: Our Z-Axis power feed machine adopt ergonomic design, when the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
BulletPoint3 : Convient to Install: This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 3.75kg/8.27lbs. Easy to install, it can provide stable power improve work efficiency.
BulletPoint4 : High Transmission Efficiency: This power feed built in Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise.
BulletPoint5 : Flexible speed adjustment: This power feeder unit has 2 different ways of adjusting the speed: manual and automatic. You can not only adjust the speed by manually adjusting the control button, but also set the device to automatic constant speed, freeing your hands and making it easier for you.
BulletPoint6 : The connection piece adopts dovetail structure, which matches with each slot of the machine tools parts to enhance its performance and accuracy. Versatile application: The mini metal milling machine is not only powerful to process the regular materials, but also it is perfect choice for special items, such as various types of planes, grooves, gears etc.
BulletPoint7 : The chuck is fixed by a hexagon nut to increase the tightness of the clamping tools (such as drill bits, cutters, wood-turning lathe driver).
BulletPoint8 : By adding some loose-preventing nuts on the side of small& big slider, not only avoid the gap after excessive vibration, but also improve the processing accuracy.
BulletPoint9 : The electroplated hand wheels are designed with 3/4 semi-circular structure. With accuracy of 0.02 mm scale line, the precision of machine tools be increased obviously. (The scale lines are molded at one time, aren't sticky label)
Capacity : 65 millimeters
CompatibleDevices1 : Drilling Machine
CompatibleDevices2 : Lathe
CompatibleDevices3 : Milling Machine
ExteriorFinish : Plastic
ExternallyAssignedProductIdentifier : 8130550310563
ExternallyAssignedProductIdentifier1 : 840366402175
ExternallyAssignedProductIdentifier2 : 0840366402175
IncludedComponents : 3
ItemName : FAHKNS Z-Axis Power Feed for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feeder 110V for Bridgeport and Similar Knee Type Milling Machines(5/8" Diameter Shaft)
ItemPackageDimensions_Height : 41.5036 centimeters
ItemPackageDimensions_Length : 18.2118 centimeters
ItemPackageDimensions_Width : 40.2844 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
LockType : Self Centering
Manufacturer : FAHKNS
Material : Aluminum
Material1 : Cast Iron
Material2 : Alloy Steel
MaximumRotationalSpeed : 11000 rpm
ModelName : Z-Axis Power Feed
ModelNumber : 170332-LTMHE
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : X-Axis
PowerSourceType : ac
ProductDescription : A great combo of 3"/80 mm Rotary table with 65 mm self centering chuck with back plates & Tnuts- A perfect milling combo for smaller mills. 3inches rotary Table: 1. Quality Low Profile Rotary Table diameter 80 mm (3"Inches ) . Table is graduated 360 Degrees. 2. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. 3. Center Height in vertical position without chuck: 2-5/8" (66 mm approx) 4. Hand wheel is graduated in divisions of 10 min & can be set to zero. 65mm 3 Jaws Self Centering Chuck: 1. 65 mm 3 Jaws Self Centering Chuck M14 x 1 mounting Thread 2. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it. 3. Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table. 4. Suitable T -nuts are also supplied.
ProductSiteLaunchDate : 2023-01-30T09:45:24.260Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
ValveType : solenoid valve
Voltage : 110 volts