Cart 2 india

Specification
BaseType : Fixed
Brand : FAHKNS
BulletPoint1 : 【Suitable Models】This power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Model: AL-460, Powe: 90W, 110V input voltage, 50/60Hz, single phase; Rotate Speed:0-200 RPM.
BulletPoint2 : 【Ergonomic Design】Our X-Axis power feed machine adopt ergonomic design, when the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
BulletPoint3 : 【Convient to Install】This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 3.75kg/8.27lbs. Easy to install, it can provide stable power improve work efficiency.
BulletPoint4 : 【High Transmission Efficiency】This power feed built in Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise.
BulletPoint5 : 【Flexible speed adjustment】This power feeder unit has 2 different ways of adjusting the speed: manual and automatic. You can not only adjust the speed by manually adjusting the control button, but also set the device to automatic constant speed, freeing your hands and making it easier for you.
BulletPoint6 : Tips: 65mm Spindle mount not included if you use a non-NymoLabs Machine.
Color : Black
ExternallyAssignedProductIdentifier : 7330009205964
ExternallyAssignedProductIdentifier1 : 840366400409
ExternallyAssignedProductIdentifier2 : 0840366400409
FinishType : Powder Coated
Horsepower : 1.5 kilowatts
IncludedComponents : 1 x Combination Rolling Mill 1 x Handle
ItemName : FAHKNS X-Axis Power Feed for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feeder 110V for Bridgeport and Similar Knee Type Milling Machines(5/8" Diameter Shaft)
ItemPackageDimensions_Height : 38.989 centimeters
ItemPackageDimensions_Length : 18.5928 centimeters
ItemPackageDimensions_Width : 33.7058 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : FAHKAS
Material : 130 MM
MaximumRotationalSpeed : 30000 rpm
ModelName : Power Feed
ModelNumber : 164137-FAH-DF
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Electric
PackageLevel : unit
PartNumber : X-Axis Power Feed
PowerSourceType : ac
ProductDescription :

Feature:

Combination rolling mill 130 mm

5 MM max opening

Steel forged handle

Solid hobbed steel gears

Precision high strength housing

Precision engineered for lifetime of use

Product: Combination rolling mill

Gear ratio: 4:1

Roller width: 130 mm

Roller diameter: 65 mm

Maximum opening: 0-5 mm

Flat area ( /- 0.01mm): 57 mm

Square wire( /- 0.01mm): 1.0, 2.0, 3.0, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0mm

Ring shank - half round ellipse(mm): 2.5x1, 3x1.25, 4x1.5mm

Produce metal foil as thin as .001 inch

Product size: 25×14.5×29cm

Package size: 34x34x20 cm (13.39x13.39x7.87 inch)

Net weight: kg

Gross weight: 22.5 kg

 

Package Content:

1 x Combination Rolling Mill

1 x Handle

ProductSiteLaunchDate : 2023-02-27T07:32:33.937Z
Size : M8
Speed : 24000 rpm
Style : X-Axis
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 710 watts