Cart 2 india

Specification
Amperage : 5 amps
BaseType : Fixed
Brand : Doesbot
BulletPoint1 : New design by Doesbot in 2023
BulletPoint2 : Input voltage (board power supply): 12V to 24V, Toggle switch control
BulletPoint3 : Support 48V 500W DC spindle motor
BulletPoint4 : Support 12V, 5V with TTL and without TTL laser.Maximum 12v 60w
BulletPoint5 : Adjustable driver subdivision
BulletPoint6 : Support the xyz limit switch, probe interface
BulletPoint7 : Support Externally connected high-power driver
BulletPoint8 : Nano 3-Axis Control Board is a Arduino Nano based 3-Axises Motion control system
BulletPoint9 : This controller has burned the grbl1.1 firmware
Color : RED
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8903562971158
ExternallyAssignedProductIdentifier1 : 0749350422093
ExternallyAssignedProductIdentifier2 : 749350422093
Horsepower : 500 watts
IncludedComponents : Motherboard, Spindle motor line, USB data line
ItemName : Doesbot GRBL 1.1 CNC 3-Axis Control Board Support 48V 500W DC Spindle and 12V 60W Laser with Power Switch for DIY Mini Engraving Machine Wood Router CNC 1310, 1610 PRO, 3018 PRO, 3018 PRO-MAX
ItemPackageDimensions_Height : 16.2052 centimeters
ItemPackageDimensions_Length : 3.9116 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Doesbot
Material : ALLOY TOOL STEEL
MaximumRotationalSpeed : 10000 rpm
ModelNumber : 3AXIS-RED
PartNumber : 3AXIS-RED
PowerSourceType : Corded Electric
ProductDescription : New design by Doesbot in 2023

Board with 1.6MM high-quality A-plate, reliable and stable.

Input voltage (board power supply): 12V to 24V, Toggle switch control, socket 5.5-2.5 compatible with 2.1, Power polarity inside positive(+),outside negative(-)

Please note the positive and negative poles, make the right connection. Its not seller's responsibility if the fault was from this.

Double y-axis, all-round use,XYZ or XYY.

Stepper drive setup subdivision.

Integrated 3 A4988 drivers, directly connect to four wire stepper motor.

Support 48V 500W DC spindle motor

Support 12V, 5V with TTL and without TTL laser.Maximum 12v 60w

Adjustable driver subdivision.

Support the xyz limit switch, probe interface.

Support Externally connected high-power driver, Please unplug A4988 drivers first

Support external Offline Controller(Optional).

A4988 can be replaced with drv8825 driver and tmc2208 driver. Please pay attention to the direction of the driver during replacement. Nano 3-Axis Control Board is a Arduino Nano based 3-Axises Motion control system, can be used for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc.

This controller has burned the grbl1.1 firmware

Packing list:

1*Motherboard

4*A4988 drive with radiator (One of the gifts)

1*Spindle motor line (vh3.96)

1*USB data line
ProductSiteLaunchDate : 2023-05-23T11:46:06.102Z
Size : MT3 shank-Drawbar M12 x 1.75
Speed : 12000 rpm
Style : APX150 202-2212
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 100 volts