Cart 2 india

Specification
Brand : CNCTOPBAOS
BulletPoint1 : ♞【Basic parameters】 Voltage: DC 24V ; No Load Speed: 12000rpm±10% ; Phase: 3 phase ; Rated Load Speed: 10000rpm±10% ; No load current: Resistance : 0.34Ω/phase±10% ; Inductance: 0.22mH/phase±10%, insulation class is B,safer to use.
BulletPoint2 : ♞【Advantages】The brushless motor is made of high-quality aluminum alloy material, which is strong and durable, with good strength and good corrosion resistance.Compared with other ordinary spindle motors,the brushless design enables a much longer service life of about 50,000 hours.
BulletPoint3 : ♞【Main applications】 The diameter of the motor is 44mm, so it is suitable for most 3018 CNC engraving machine on the market, including 3018-PRO, 3018-PRO Max and other 3018 models,and also suitable for lathes, rolling mills, truck cranes, pumps and conveyors, etc.The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed.
BulletPoint4 : ♞【Low noise and high machining accuracy】 the brushless spindle motor is much quieter than other normal motors, up to 26dB quieter during operation.The performance of high stability operation makes it ideal for high precision engraving.
BulletPoint5 : ♞【Package list】1 x Spindle Motor ( ER11 collet is not included) ; 1 x ER11-A nut ; 1 x Driver Board with case ; 1 x 200mm Length Cable ; 1 x 200mm Dupont Cable ; 1 x 800mm Length Cable ; 1 x Wrench ; 4 x T-bolt nut
ExternallyAssignedProductIdentifier1 : 0816550029336
ExternallyAssignedProductIdentifier2 : 816550029336
IncludedComponents : Close-loop stepper motor
ItemName : CNCTOPBAOS 24V DC Brushless Spindle Motor 12000rpm ER11,Upgraded Spindle for 3018 Pro,with PWM Speed Controller Driver Board with Cable,for CNC Router Engraving Milling Lathe Machine
ItemPackageDimensions_Height : 17.399 centimeters
ItemPackageDimensions_Length : 10.1092 centimeters
ItemPackageDimensions_Width : 11.2014 centimeters
ItemTypeKeyword : power-milling-machines
Manufacturer : Changzhou Rattm Motor Co.,Ltd
Material : Aluminum
ModelName : XLCSM-60
ModelNumber : BLCD4475
NumberOfBoxes : 1
PartNumber : BLCD4475
PowerSourceType : AC
ProductDescription :

Package List

1 x Brushless DC Spindle Motor ( ER11 collet is not included) 

1 x ER11-A nut

1 x Driver Board with case 

 1 x 200mm Length Cable 

1 x 200mm Dupont Cable 

1 x 800mm Length Cable 

1 x Wrench 

4 x T-bolt nut

Specifications:

Rated Voltage: 24V DC

Voltage Range: 18-24 V DC

Rated Load: 0.142Nm

Operating Position: Output shaft for vertical

No Load Speed: 12000rpm±10%

Rated Load Speed: 10000rpm±10%

Number of Poles: 6

Number of Phase: 3

Driving Method: 3 phase full wave rectified (PWM)

 

ProductSiteLaunchDate : 2022-06-01T07:00:00.000Z
Speed : 12000 rpm
Style : For PROVerXL 4030 Extent to 6060 Version
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 24 volts