Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : 【Installation】 The universal wired tool setting instrument can be installed in various precision engraving and milling machines, engraving machines, machining centers, Tang milling machines, drills and other machines and equipment for axial tool detection.
BulletPoint2 : 【Advantages】 The use of the tool setting instrument can greatly reduce the defective products caused by inaccurate tool setting/calibration, tool breakage, breakage, and wear due to manual operation.
BulletPoint3 : 【Can be used for a long time】 The IP67 normally-open type tool setter adopts super-hard alloy material, with indicator light, water- and oil-proof design, which can adapt to various environments.
BulletPoint4 : 【NC/ NO】 The CNC universal tool setting instrument has two output modes to choose from: NC normally closed type / NO normally open type, stroke 8mm/0.3 inches, easy to use.
BulletPoint5 : 【1.8m cable】 10-30V DC waterproof and oil-proof tool setter test speed is 50-200mm/min, standard 1.8m cable, rated voltage: DC24V±10%, 20mA (maximum).
BulletPoint6 : 【Note】This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
Color : Blue
ExternallyAssignedProductIdentifier1 : 0754193192898
ExternallyAssignedProductIdentifier2 : 754193192898
Horsepower : 800 watts
IncludedComponents : inc
ItemName : Auto Tool Sensor Universal Type NC/NO CNC Probe Tool Touch Sensor Setting for CNC Router Milling Engraving Machine(Normally Open)
ItemPackageDimensions_Height : 15.5 centimeters
ItemPackageDimensions_Length : 7.2 centimeters
ItemPackageDimensions_Width : 10.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Hilitand
Material : Aluminum
MaximumSupplyVoltage : 30 volts_of_direct_current
MeasurementAccuracy : 0.002
ModelName : MTA_11H
ModelNumber : zg453140839
NumberOfItems : 3
OutputType : NC/NO
PartNumber : Hilitandi429am158x-11
PowerSourceType : No
ProductDescription : Specification:
Item Type: Automatic Tool Sensor 
Test Speed: 50-200mm/min
Service Life: 3 million times
Maximum Diameter: Approx. 0.5mm / 0.02in /20mm / 0.79in 
Total Height: Approx. 65mm / 2.6in
Total Stroke: Approx. 8mm / 0.3in
Default Form: NC normally closed type/NO normally open type
Voltage Range: 10-30V DC
Rated Voltage: DC24V±10%, 20mA (maximum)
Blowing Function: Yes
Whether To Bring The Indicator Light: Yes (open when normally closed)
Level: IP67 x 100% waterproof, oil-proof sealing performance
Optional Output Mode: NO/NC
Itinerary: 5
Repeat Accuracy: 0.002 (Condition: Operating speed 50-200mm/min)
Structure: IP67
Force: 1.5N (the installation state must be vertical)
Tool Surface Material: Super hard alloy
Surface Treatment: Mirror polishing 4S
Rating: DC24V 20mA (maximum) recommended value 10mA resistance load
Cable Specifications: Standard 1.8m oil resistant
Cable Sheath: Approx.8mm / 0.3in 304 stainless steel
Output Mode: B: NC (emergency stop when the is disconnected)
Voltage: DC24V 20mA resistance load (in special cases, load and current limit must be added)
Scope of Application: Mainly used in engraving machine

Package List:
1 x Automatic Tool Sensor 
1 x Accessories

ProductSiteLaunchDate : 2020-10-30T00:00:00.000Z
Size : normally open
SpecificUsesForProduct : Engraving machines
Speed : 20000 rpm
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 1 volts