Cart 2 india

Specification
Brand : AURSNICO
BulletPoint1 : Multi-Axis Control:Supports X, Y, Z, and A axis directional motion controls for comprehensive CNC operations.
BulletPoint2 : MPG Pendant Design:Ergonomic MPG pendant design for comfortable and efficient manual control.
BulletPoint3 : MPG Activewear Emergency Stop:Equipped with an Emergency Stop feature for immediate control in critical situations.
BulletPoint4 : Versatile Control Modes:Offers both STEP and Velocity modes for precise and responsive motion control.
BulletPoint5 : USB to Serial Interface:Comes with a USB to serial cable for easy connection to laptops and other devices.
IncludedComponents : 4 Axis Mach3 MPG Handle Controller
ItemName : AURSNICO CNC MACH3 MPG Pendant 4 Axis Handle Controller Electronic Handwheel with Emergency Stop MODBUS Protocol CNC MPG Manual Control for Mach3 System CNC Router Engraver Engraving Milling Machine
ItemTypeKeyword : power-milling-machines
Manufacturer : NikoCNC
Material : Plastic
ModelName : Multifunction Milling Machine Worktable
ModelNumber : WJL
NumberOfItems : 1
PartNumber : Niko-Mach3-MPG2
PowerSourceType : hand_powered
ProductDescription : Package included:

1 x 4 Axis CNC Mach3 USB HandWheel Pulse Optical Encoder Generator without batteries
1 x USB-Serial Adapter Cable

Function Introduction

1.Control each axis motion by rotation.
2.Choose controlled axis (X, Y, Z, A) via band switch.
3.Choose control mode by band switch (Step and Velocity)

All the ma nual control supplied by Mach3 is realized by the keyboard. MODBUS electronic handwheel control the motor motion at each axis through the rotation of rotary encoder. When you use the mode of Velocity, the movement direction of each axis will be controlled by the direction of encoder wheel you rocked, while the moving speed of each axis will be determined by your rocking speed of wheel. Such operation looks like much more approaching to our custom. If you choose to use STEP mode, it mea ns that a precise moving mode will be entered. When you choose 0.01gear, the wheel will turn a grid, and the controller axis will move 0.01 toward the direction you turned. When you choose 0.1gear, the wheel will turn a grid, and the controlled axis will change 0.1. Followed by analogy, 1 gear can control the change of 1.

Installation Installation settings

This kind of electronic handwheel is communicated through Modbus agreement and Mach3, connected with computer via RS232 and take 5V voltage by USB. As a friendly Modbus interface was supplied by Mach3, there’s no need to install any other drivers when using MODBUS electronic handwheel.
Before use, MODBUS serial port should be connected with the serial of computer (COM port) and the fixed screw need to be fastened at first. Next connect the USB of MODBUS with computer and run Mach3 ( Ver 3.04)
ProductSiteLaunchDate : 2024-11-09T08:03:19.106Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111700