Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 【Specifications】: Power: 4.5kw (1HP=0.735w), Voltage 220V, Current: 9A, Frequency: 300Hz, Speed: 18000rpm, Plug stroke length: 1300mm, Base plate diameter: 200mm, Height: 1200mm, Maximum engraving depth: 0-20mm, Runout: less than 0.01mm, Chuck: ER32, Bearing: 4 ceramic ball bearings.
BulletPoint2 : 【Material】: The wind spindle motor mounting flange is made of alloy aluminum, and the aluminum body ensures greater power and longer life; oxygen-free copper coils can ensure high-quality processing accuracy and engraving performance.
BulletPoint3 : 【ER32 dynamic balancing chuck】: The ER32 chuck of the CNC router spindle is quenched with manganese steel, with a runout of less than 0.01 mm, high precision and strong stability. Dynamic balancing technology can effectively reduce noise during use.
BulletPoint4 : 【4 bearing design】: It uses four P4 7007*2, P4 7205*2 precision ceramic bearings, which are smoother and more powerful, ensuring the rotation accuracy of the electric spindle during high-speed grinding.
BulletPoint5 : 【Use】: Mainly used for processing wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metallic carvings. (Please pay more attention, this is a woodworking spindle, which can only be used for woodworking and aluminum processing, not for steel processing. If you need steel processing, please check the metal spindle, thank you!)
Color : One Color
ExternallyAssignedProductIdentifier : 7642780346195
ItemName : 4.5KW ER32 220V 300Hz Air-cooled Spindle Motor with Mounting Flange, 18000RPM Speed, with 4 Bearings, for CNC Engraving Machine Engraving, Milling and Grinding
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCFDGJGYA
ModelNumber : FCFDGJGYA
NumberOfItems : 1
PartNumber : FCFDGJGYA
ProductDescription : Reminder: When you receive the new electric spindle, start running at a low speed of 6000, increase 3000 revolutions every ten minutes, until it reaches 24000 revolutions, then it can be used normally. The bearings in the new spindle need to be preheated and run-in, remember! In addition, in order to extend the service life of the spindle, it is best to start the spindle for a 10-15 minute test run during normal use.
Speed ​​regulation method: Through the three-phase output inverter, adjust the frequency of the inverter to change the spindle speed. Cooling method: air cooling
Power interface: optional waterproof aviation plug. Aviation plugs marked with "1", "2", "3", "4", "1", "2", "3" connect to the inverter (U, V, W), 4 connects to the inverter ground. (Note! Our spindle "4" is connected to GND to ensure personal safety!!)
Power: 4.5kw (1HP=0.735w)
Voltage: 220V
Current: 9A
Frequency: 300Hz
Speed: 18000rpm
Plug stroke length: 1300mm
Base plate diameter: 200mm
Height: 1200mm
Maximum engraving depth: 0-20mm
Runout: less than 0.01mm
Chuck: ER32
Clamping tool diameter: 1mm, 2mm, 3mm, 3.175mm (1/8), 4mm, 5mm, 6mm, 6.35mm (1/4), 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 12.7mm (1/2), 13mm, 14mm, 15mm, 16mm
Grease lubrication
Main uses: wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metallic engraving. (Please pay more attention, this is a woodworking spindle, which can only be used for woodworking and aluminum processing, not for steel processing. If you need steel processing, please check the metal spindle, thank you!)

Packing list:

1 x air-cooled spindle

1 x ER32 dynamic balance nut
ProductSiteLaunchDate : 2024-07-22T11:27:33.578Z
Size : One Size
UnitCount : 1