Cart 2 india

Specification
Brand : Generic
BulletPoint : Motors
BulletPoint1 : ❉[Material]: The main shell of the stone spindle is made of high-quality stainless steel and the rotor is made of pure copper coil. The front end of the spindle has a built-in waterproof design, which has been treated with rust and oxidation resistance. The upgraded aviation plug can ensure stable power input.
BulletPoint2 : ❉[Stone spindle parameters]: Spindle motor diameter: 100*300mm/3.94*11.8in, power: 4.5KW, voltage: 380V, current: 9A, frequency: 400Hz, speed: 24000RPM, torque: 1.79Nm, runout: less than 0.005 mm. CNC spindle motors are mainly used for engraving machines and frequency converters.
BulletPoint3 : ❉[ER20 ​​standard chuck]: ER20 chuck is cast with manganese steel material, with high precision, high stability, high hardness, good wear resistance, cone hole runout: 0.001mm, clamping range from 3.175mm-13mm, which can meet the needs of precision machining.
BulletPoint4 : ❉[Cooling method]: The maximum speed temperature rise of the stone spindle motor is 10℃. It adopts water circulation cooling method, which effectively cools the heat generated by the spindle during high-speed rotation through water circulation, and dissipates the heat in the cooling water into the air through heat exchange, so that the cooling water temperature is reduced.
BulletPoint5 : ❉[Scope of application]: CNC stone engraving spindles are widely used in the stone processing industry, including tombstone engraving, stone carving artwork production, architectural decorative stone processing and other fields. Through precise carving and processing, various exquisite stone products can be created
Color : One Color
ExternallyAssignedProductIdentifier : 7645770078946
IncludedComponents : ZYT83-10S 120W 110V Mini Lathe Motor 2500RPM
ItemName : 4.5KW 380V 400HZ 100 * 300mm Water-cooled Spindle Motor Kit, With ER20 Collet And 4 Bearings, Speed 24000RPM, For CNC Stone Engraving Machine
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FDGYYHGEE
ModelNumber : FDGYYHGEE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FDGYYHGEE
ProductDescription : Speed ​​regulation method: Through a three-phase output inverter, adjust the frequency of the inverter to change the spindle speed.
Power interface: Optional 4-pin waterproof aviation plug. Aviation plugs marked with "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter grounding device.

Parameters:
Model: GDZ-27
Name: Water-cooled spindle for stone carving
Power: 4.5Kw
Voltage: 380V
Speed: 24000r/min
Frequency: 400Hz
Current: 9A
Torque: 1.79Nm
Chuck: ER20 φ3.175-φ13
Dynamic balance: 0.1mg
Bearing: 2*7005C P4 and 2*7003C P4
Maximum speed temperature rise: 10℃
Maximum speed noise: 10db
Conical hole runout: 0.001mm
Lubrication: Grease
Cooling: Water cooling
Direction of rotation: Counterclockwise from the shaft extension end
Weight: 13kg
Main use: Mainly used in the stone processing industry, including tombstone carving, stone carving artwork production, architectural decorative stone processing and other fields.

Packing list:
1 x water-cooled spindle motor
1 x ER20
1 x 4-hole aviation plug
1 x 22 wrench
1 x 30 wrench
ProductSiteLaunchDate : 2024-09-11T10:48:37.326Z
Size : One Size
Speed : 2500 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 120 watts