Cart 2 india

Specification
Brand : Generic
BulletPoint : Motors
BulletPoint1 : [Woodworking spindle parameters]: Spindle motor diameter: 100*300mm/3.94*11.8in, power: 4.5KW, voltage: 380V, current: 9A, frequency: 400Hz, speed: 24000RPM, torque: 1.79Nm, runout: less than 0.005mm. CNC spindle motors are mainly used for engraving machines and frequency converters.
BulletPoint2 : [4 bearing design]: Our CNC spindle motor adopts 4 bearing design (2*7005C P4 and 2*7003C P4), which makes engraving more stable and more precise. High speed 24000RPM brings higher engraving efficiency.
BulletPoint3 : [ER20 ​​standard chuck]: ER20 chuck is cast with manganese steel material, with high precision, high stability, high hardness, good wear resistance, cone hole runout: 0.001mm, clamping range from 3.175mm-13mm, which can meet the needs of precision machining.
BulletPoint4 : [Cooling method]: The maximum speed temperature rise of the spindle motor is 10℃. It adopts water circulation cooling method, which effectively cools the heat generated by the spindle during high-speed rotation through water circulation, and dissipates the heat in the cooling water into the air through heat exchange to reduce the cooling water temperature.
BulletPoint5 : [Scope of application]: Our water-cooled spindle motor is mainly used for engraving and milling wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, and is widely used in mechanical equipment such as engraving machines, CNC milling machines, and machining centers.
Color : One Color
ExternallyAssignedProductIdentifier : 7645770078946
IncludedComponents : ZYT83-10S 120W 110V Mini Lathe Motor 2500RPM
ItemName : 4.5KW 380V 100 * 300mm Water-cooled Spindle Motor Kit, With ER20 Collet And 4 Bearings, 24000RPM 400Hz, For Engraving Wood And Other Non-metallic Materials
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FDGYCDJGA
ModelNumber : FDGYCDJGA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FDGYCDJGA
ProductDescription : Speed ​​regulation method: Through the three-phase output inverter, adjust the frequency of the inverter to change the spindle speed.
Power interface: Optional 4-pin waterproof aviation plug. Aviation plugs marked with "1", "2", "3", and "4", "1", "2", and "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter grounding device.

Parameters:
Model: GDZ-27
Name: Woodworking water-cooled spindle
Power: 4.5Kw
Voltage: 380V
Speed: 24000r/min
Frequency: 400Hz
Current: 9A
Torque: 1.79Nm
Chuck: ER20 φ3.175-φ13
Dynamic balance: 0.1mg
Bearing: 2*7005C P4 and 2*7003C P4
Maximum speed temperature rise: 10℃
Maximum speed noise: 10db
Conical hole runout: 0.001mm
Lubrication: Grease
Cooling: Water cooling
Direction of rotation: Counterclockwise from the shaft end
Weight: 13kg

Packing list:
1 x water-cooled spindle motor
1 x ER20
1 x 4-hole aviation plug
1 x 22 wrench
1 x 30 wrench
ProductSiteLaunchDate : 2024-09-11T10:48:41.288Z
Size : One Size
Speed : 2500 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 120 watts