Specification Brand : Generic BulletPoint1 : Woodworking Water-Cooled Spindle Parameters: Size: 100*250mm/3.94*9.84in, Power: 3KW, Current: 10.5A, Voltage: 220V (Different voltages are suitable for different inverters, and the inverter voltage must be consistent with the spindle!), Speed: 24000RPM, Frequency: 400HZ, Shaft End Connection: ER20 Ø3.175~12.7, Runout: Less than 0.005mm. CNC spindle motors are mainly used for engraving machines or used with inverters. BulletPoint2 : High-quality materials: The CNC spindle body is made of high-quality stainless steel, and the stainless steel body can ensure high-quality processing and engraving performance and a longer service life. BulletPoint3 : ER20 standard chuck: The CNC spindle chuck is quenched with manganese steel, with a runout of less than 0.005mm, a clamping range of 3.175-12.7mm, high precision, not easy to break, and increases the stability of the working process. BulletPoint4 : 4-bearing design: The water-cooled spindle motor adopts a 4-bearing (2*7005, 2*7203) design with high accuracy, high precision, high hardness, good stability and excellent anti-rust performance. The powerful power of 24000R/min high speed brings higher work efficiency than ever before. BulletPoint5 : Main purpose: used for wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic carvings. Color : One Color ExternallyAssignedProductIdentifier1 : 0757582634016 ExternallyAssignedProductIdentifier2 : 757582634016 IncludedComponents : 1X ER20 (60)-Angle contact (for boring and milling) waterproof ItemName : 3KW 220V 4 * 9.8in Woodworking Water-Cooled Spindle Motor Kit, Speed 24000RPM 400HZ, 4 Bearings And ER20, For CNC Router Engraving And Cutting Machine ItemPackageDimensions_Height : 30 centimeters ItemPackageDimensions_Length : 50 centimeters ItemPackageDimensions_Width : 30 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : power-milling-machines Manufacturer : Generic ModelName : FDJAFFDHH ModelNumber : FDJAFFDHH NumberOfItems : 1 PartNumber : FDJAFFDHH PowerSourceType : ac ProductDescription : Specifications: Speed regulation method: Through the three-phase output inverter, adjust the frequency of the inverter to change the spindle speed. Cooling method: water cooling Power interface: Optional 4-pin waterproof aviation plug. Aviation plugs marked with "1", "2", "3", and "4", "1", "2", and "3" are connected to the inverter power supply (U, V, W), and 4 is connected to the inverter ground. Size: 100mm Rated power: 3KW Current: 10.5A Shaft end connection: ER20 Ø3.175~Ø12.7 Bearing: 4 bearings (2*7005, 2*7203) Speed: 24000RPM Voltage: 220V (different voltages correspond to different inverters, and the inverter voltage must be consistent with the spindle!) Frequency: 400Hz Lubrication method: grease Weight: 10KG Main use: for non-metallic engraving such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc.
Packing list: 1 x water-cooled spindle motor 1 x 4-hole aviation plug 1 x ER20 1 x 22 wrench 1 x 30 wrench ProductSiteLaunchDate : 2024-08-28T06:45:50.531Z Size : One Size SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 26101200