Specification AgeRangeDescription : adult Brand : Generic BulletPoint : Composite, G-10, Canvas Phenolic, Linen Phenolic, Stock Rods BulletPoint1 : [Material]: Our stone spindle motor uses stainless steel to build the spindle body, pure copper rotor, high precision. The head bearing adopts a double dustproof design, and the tail aviation plug interface comes with a dust cover, which can effectively prevent dust from entering the spindle. BulletPoint2 : [Water-cooled spindle parameters]: diameter: 100*250mm/3.94*9.84in, power: 3.2KW, voltage: 220V, current: 10A, speed: 24000RPM, frequency: 400Hz, chuck: ER20Ø3.175-Ø13, maximum speed temperature rise: 60℃, dynamic balance: ER20, maximum speed noise: 20db, cone hole runout: 1mm, bearing: 3 bearings (2*7005C P4, 1*7003C P4), runout: less than 0.005 mm. CNC spindle motors are mainly used for engraving machines or used with frequency converters. BulletPoint3 : [3-bearing design]: Our spindle motor adopts 3-bearing design (2*7005C P4, 1*7003C P4), with high rigidity, low vibration during processing, high processing accuracy, good stability, excellent anti-rust performance, 24000R/min high speed and strong power bring higher efficiency than ever before. BulletPoint4 : [Cooling method]: Our spindle motor mainly adopts water circulation cooling due to the heat generated by the high-speed operation of the spindle, with good heat dissipation effect to ensure smooth operation. BulletPoint5 : [Application]: Our stone engraving machine spindle is mainly used for stone engraving, stone relief, stone line engraving, etc., and is widely used in the stone processing industry. Color : One Color ExternallyAssignedProductIdentifier : 7604567954481 ExternallyAssignedProductIdentifier1 : 0748497536908 ExternallyAssignedProductIdentifier2 : 748497536908 ItemName : 3.2KW 220V ER20 400HZ 3.94 * 9.84in Water-cooled Spindle Motor Kits, Speed 24000RPM, For CNC Stone Engraving Machine ItemPackageDimensions_Height : 30 centimeters ItemPackageDimensions_Length : 50 centimeters ItemPackageDimensions_Width : 30 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : power-milling-machines Manufacturer : Generic Material : Stainless Steel ModelName : FDBYYGJBA ModelNumber : FDBYYGJBA NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : FDBYYGJBA ProductDescription : Parameters: Dimensions: 100*250mm/3.94*9.84in Power: 3.2KW Voltage: 220V Current: 10A Speed: 24000RPM Frequency: 400Hz Shaft end connection: ER20 Ø3.175-Ø13 ER20 clamping range: 3.175-13mm Dynamic balance: ER20 Maximum speed noise: 20db Spindle taper: 15 Tapered hole runout: 1mm Bearing: 3 bearings (2*7005C P4, 1*7003C P4) Jumping: less than 0.005 mm Lubrication method: grease Cooling method: water cooling Weight: 23kg Application areas: CNC stone engraving machine spindles are widely used in stone processing industry, including tombstone engraving, stone relief, stone line engraving, etc.
Packing list: 1 x CNC stone engraving machine spindle motor 1 x 4-hole aviation plug 1 x ER20 1 x 22 wrench 1 x 30 wrench ProductSiteLaunchDate : 2024-09-04T11:16:47.486Z Size : One Size UnitCount : 1 UnspscCode : 26101200