Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Water-cooled spindle parameters: size: Ø100*250mm/3.94*9.84in, speed 24000RPM, power: 3.2KW, voltage: 220V/380V two options, current: 10A, frequency: 400HZ, shaft end connection: ER20Ø3.175-Ø13, bearing: 3 bearings (2*7005C/P4, 1*7003C/P4), runout: less than 0.005mm. CNC spindle motors are mainly used for engraving machines or used with frequency converters.
BulletPoint2 : Dynamic balancing design: We use innovative and advanced dynamic balancing technology, which is different from other milling spindle motors. The advantages of the ER20 standard chuck are good rigidity, sufficient strength, unique drainage design, and high precision.
BulletPoint3 : 3 precision bearing design: The water-cooled spindle motor uses 3 P4-level 2*7005C-1*7003C bearings with high precision, high density, good stability and good anti-rust performance. The speed of 24000RPM brings higher powerful power, improves work efficiency and the precision of processing workpieces.
BulletPoint4 : Low noise and heat dissipation: Dynamic balancing technology can effectively reduce noise during use and avoid auditory fatigue. The scientifically designed water cycle has better heat dissipation effect and ensures smooth operation.
BulletPoint5 : Wide range of uses: Water-cooled motors are commonly used to process materials such as wood, stone, molds, metal, etc., which are suitable for machinery manufacturing, sheet metal processing, guardrails, factories, shipyards, home improvement, construction and other fields.
Color : One Color
ExternallyAssignedProductIdentifier : 7320448310251
ExternallyAssignedProductIdentifier1 : 0840403756346
ExternallyAssignedProductIdentifier2 : 840403756346
IncludedComponents : /
ItemName : 3.2KW 220V ER20 400HZ 100 * 250mm Water-cooled Spindle Motor Kits, 3 Precision Bearings 24000RPM High Speed For Woodworking
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
Material : Metal
ModelName : FDAJAACGA
ModelNumber : FDAJAACGA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FDAJAACGA
PowerSourceType : ac
ProductDescription : Speed ​​regulation method: Change the spindle speed through a three-phase output inverter and adjust the inverter frequency.
Cooling method: water cooling
Power interface: Optional 4-pin waterproof aviation plug, marked with "1", "2", "3", "4", "1", "2", "3" aviation plugs connected to the inverter (U, V, W), connected to the inverter 4 ground the equipment.
Diameter: φ100*250mm/3.94*9.84in

Power: 3.2kw

Voltage: 220V/380V

Current: 10A

Frequency: 400Hz

Speed: 24000rpm

Runout: less than 0.01mm

Bearing model: 2*7005C/P4, 1*7003C/P4

Number of phases: 3

collet: ER20 Ø3.175-Ø13

Lubrication method: grease lubrication

Main use: for non-metallic engraving such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc.

Packing list:

1 x water-cooled spindle motor

1 x ER20 collet

1 x 4-hole aviation plug

2 x 22/30 wrench
ProductSiteLaunchDate : 2024-08-15T09:29:07.703Z
Size : One Size
Style : M3-M20 360°Electric Tapping Machine Table Type/Touch/CNC/ Smart
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23240000
Voltage : 220 volts_of_alternating_current
Wattage : 1200 watts