Cart 2 india

Specification
Brand : G-Penny Machine
BulletPoint1 : AC 110V spindle motor (Must need connect to inverter/VFD)
BulletPoint10 : Made in Germany
BulletPoint2 : 4pcs 7 series angular contact bearing, exterd the spindle using life.
BulletPoint3 : Spindle connect to GND, Pin-4 connect to inverter GND.
BulletPoint4 : Spindle 1-2-3, connect to inverter U. V. W.
BulletPoint5 : Electronic Speed Stabilization maintains speed even under load
BulletPoint6 : Electronic Soft Start motor
BulletPoint7 : Rat-Tail handle design for comfort and control with Non-Locking switch
BulletPoint8 : 14.5 Amp
BulletPoint9 : Includes Magnetic Guide Rail for increased control
Color : Green, Black, Silver
Directions : 1. Quickly, cleanly remove weld beads in a single work step with the newly developed metal weld shaver. 2. Weld bead removal creates small metal chips (not hazardous metal dust). 3. One-touch controller: patented, tool-free setting of the cutting depth in 0.1 mm increments. 4. Ready for use in seconds thanks to the magnetic guide rail which can be attached without tools (50 cm long, extendable). 5. Simply and easily exchange the indexable inserts on the cutter head. 6. Streamlined handle area and large bow type handle which can be adjusted without tools for reliable, even guidance. 7. Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customized speeds to suit the application material and speeds that remain almost constant, even under load. 8. Electronic soft start and restart protection. 9. With metaBOX, the smart solution for transportation and storage.
ExternallyAssignedProductIdentifier1 : 4061792210356
ExternallyAssignedProductIdentifier2 : 04061792210356
IncludedComponents : Collet, Nut
IncludedComponents1 : PFM 17 Tool
IncludedComponents2 : Magnetic guide rail (50cm long)
IncludedComponents3 : (3) Indexable carbide inserts (universal)
IncludedComponents4 : Bow type handle
IncludedComponents5 : Torx-15 Screwdriver
IncludedComponents6 : T-handle Screwdriver SW 4
IncludedComponents7 : Open-Ended Spanner SW 10
IncludedComponents8 : Plastic Carrying case
ItemName : 2.2KW ER20 D80 110V Air cooled spindle motor 4pcs ceramic ball bearings (110, Volts (AC))
ItemPackageDimensions_Height : 40 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Lifestyle : Professional
Manufacturer : G-Penny Machine
Material1 : Metal
Material2 : Steel
Material3 : Stainless Steel
Material4 : Aluminum
ModelName : 2.2KW ER20 D80 220V Air cooled spindle motor4pcs ceramic bearings
ModelNumber : 2.2KW ER20 D80 220V
NumberOfBlades : 3
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : PFM 17
PowerSourceType : AC
ProductDescription : Size:80x224mm Power Interface:Optional H20-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. Power:2.2kw Voltage:110v Current:20A Frequency:0-400Hz Speed: 0-24000rpm Runout Off:Less than 0.01mm Diameter(mm): 80 Bearing Type: 2 x 7005 P4 DT & 2 x 7002 P4 DT 4pcs fully sealed angular contact bearings Collet: ER20 Main Application:Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)
ProductSiteLaunchDate : 2024-04-29T09:15:16.274Z
RecommendedUsesForProduct : Weld bead removal
SpecificUsesForProduct : Professional
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
UnitCount : 1
Voltage : 110 volts_of_alternating_current
WarrantyDescription : 3-Year Limited Warranty
Wattage : 1700