Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 【High-quality materials】: The main body of the CNC spindle is made of high-quality stainless steel and equipped with a pure copper rotor. The upgraded waterproof aviation plug ensures the stability and safety of the input power supply, and the front and rear dust covers prevent dust from entering the fuselage.
BulletPoint2 : 【Technical parameters】: Specifications: Ø3.15*8.86 in/80*225mm; Power: 2.2KW; Voltage: 220V; Current: 8A; Chuck size: ER20Ø1-Ø13; Bearing: 3 bearings (2*7005C/P4, 1*7002C/P4); Frequency: 400 Hz; Speed: 24000 R/min; Runout: less than 0.005 mm. CNC spindle motors are mainly used for engraving machines or used with frequency converters.
BulletPoint3 : 【ER20 dynamic balancing chuck】: ER20 chuck is quenched with manganese steel, with high precision, runout less than 0.005 mm, not easy to break the knife, and increased the stability of the working process. The clamping size is: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm. Dynamic balancing technology can effectively reduce noise during use and avoid auditory fatigue.
BulletPoint4 : 【Water-cooling design】: The scientifically designed water circulation cooling system has a good heat dissipation effect, which can quickly reduce the heat generated by the high-speed rotation of the spindle, ensure smooth operation and improve work efficiency.
BulletPoint5 : 【Widely used】: Woodworking CNC water-cooled spindle is mainly used for engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, and can also be engraved on the surface of soft metals such as gold, silver, copper, aluminum, lead, etc.
BulletPoint6 : 【Customer Service】If you encounter any problems, please contact us in time, we will process it within 24 hours
Color : One Color
IncludedComponents : 1 x Pneumatic Portable Marking Machine
ItemName : 2.2KW 220V 80 * 225mm Woodworking Water-cooled Spindle Motor Kits, Speed 24000RPM 3 Bearings, For Woodworking CNC Router Engraving Milling Machine
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCYCBJEGH
ModelNumber : FCYCBJEGH
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FCYCBJEGH
PowerSourceType : /
ProductDescription : Speed ​​regulation method: Through the three-phase output inverter, adjust the inverter frequency to change the spindle speed.
Cooling method: water circulation cooling
Power interface: Optional 4-pin waterproof aviation plug, marked with "1", "2", "3", "4" on the aviation plug, "1", "2", "3" are connected to the inverter (U, V, W) respectively, and 4 is connected to the inverter ground.
Dimensions: 80*225mm/3.15*8.86in
Speed: 24000RPM
Rated power: 2.2KW
Voltage: 220V
Current: 8A
Frequency: 400HZ
Shaft end connection: ER20Ø1-Ø13
Runout: less than 0.005mm
Bearing type: 2*7005C/P4, 1*7002C/P4 fully sealed angular contact bearing
Chuck: ER20 1mm-20mm
Tool diameter: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm
Cooling method: water circulation cooling
Lubrication method: grease
Main uses: engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, and can also be engraved on soft metal surfaces such as gold, silver, copper, aluminum, lead, etc.

Packing list:
1 x water-cooled spindle motor
1 x ER20
1 x 4-hole waterproof aviation plug
1 x 22 wrench
1 x 30 wrench
ProductSiteLaunchDate : 2024-07-28T16:28:38.062Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1