Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Specifications: Ø3.15*Ø9.25 in/80*235mm; Power: 2.2KW; Voltage: 220V; Current: 8A; Chuck size: ER20Ø1-Ø13; Bearing: 4 bearings (2*7005C/P4, 2*7002C/P4); Frequency: 400 Hz; Speed: 24000 R/min; Runout: less than 0.005 mm. CNC spindle motors are mainly used in engraving machines or with frequency converters.
BulletPoint2 : High-quality materials: The CNC water-cooled spindle housing is made of high-quality stainless steel and equipped with a pure copper rotor. The upgraded 4-hole waterproof aviation plug ensures the stability and safety of the input power supply, and the rear dust cover prevents dust from entering the fuselage.
BulletPoint3 : ER20 chuck: ER20 chuck is quenched with manganese steel, with high precision, runout less than 0.005 mm, not easy to break the knife, and increased the stability of the working process. The clamping sizes are: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm.
BulletPoint4 : 4 bearing design: The water-cooled spindle motor adopts 4 precision bearings (2*7005C/P4, 2*7002C/P4), with high precision, high density, high hardness, good stability and excellent anti-rust performance.
BulletPoint5 : Application: Woodworking CNC water-cooled spindle is mainly used for engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, and can also be engraved on the surface of soft metals such as gold, silver, copper, aluminum, lead, etc.
Color : One Color
ExternallyAssignedProductIdentifier : 7864112565757
ItemName : 2.2KW 220V 400HZ 80 * 235mm Woodworking Water-cooled Spindle Motor Kits, Speed ​​24000RPM 4 Bearings, For Woodworking DIY Engraving
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCYCGAJAH
ModelNumber : FCYCGAJAH
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FCYCGAJAH
ProductDescription : Speed ​​regulation method: Through the three-phase output inverter, adjust the inverter frequency to change the spindle speed.
Cooling method: water circulation cooling
Power interface: Optional 4-pin waterproof aviation plug, the aviation plug is marked with "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W) respectively, and 4 is connected to the inverter ground.
Dimensions: 80*235mm/3.15*9.25in
Speed: 24000RPM
Rated power: 2.2KW
Voltage: 220V
Current: 8A
Frequency: 400HZ
Shaft end connection: ER20Ø1-Ø13
Runout: less than 0.005mm
Bearing type: 2*7005C/P4, 1*7002C/P4 fully sealed angular contact bearing
Tool diameter: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm
Cooling method: water circulation cooling
Lubrication method: grease
Main uses: engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, can also be engraved on the surface of soft metals such as gold, silver, copper, aluminum, lead, etc.

Packing list:
1 x water-cooled spindle motor
1 x ER20
1 x 4-hole waterproof aviation plug
1 x 22 wrench
1 x 30 wrench
ProductSiteLaunchDate : 2024-07-28T16:28:38.000Z
Size : One Size
UnitCount : 1