Cart 2 india

Specification
Brand : G-PENNY Machine
BulletPoint : Rong Fu Milling Drilling Machine RF-40 Mill Plastic Spindle Wrench 28mm
BulletPoint1 : AC 110V Spindle motor ( Must need connect to inverter/VFD)
BulletPoint2 : 4pcs 7series angular contact bearing, exterd the spindle using life.
BulletPoint3 : Spindle connect to GND, Pin-4 connect to inverter GND.
BulletPoint4 : Spindle 1-2-3 connect to inverter U. V. W.
BulletPoint5 : 【Reliable Power Parameters】The power feed operates on 95 Watts with an input voltage of 110V. It functions on a 50/60Hz single-phase power supply. The rotate speed is adjustable from 0 to 200 RPM, with an impressive maximum torque of 450in-lb. It also offers a maximum feed rate of 650mm/min and a maximum return speed of 850mm/min, providing efficient and precise milling capabilities.
BulletPoint6 : 1x Water Cooled Spindle Motor(1/4 ER11 Collet); 1 x VFD with Spindle & Signal Cables; 1 x Water Pump; 1 x Water Pipe; 1 x Electric Control Box; 1 x Power Cord; 2 x Open-end Wrenches Set; 1x Manual;
Color : Blue
ExternallyAssignedProductIdentifier1 : 196336723727
ExternallyAssignedProductIdentifier2 : 0196336723727
FinishType : Powder Coated
GpsrSafetyAttestation : 1
Horsepower : 1.5 kilowatts
IncludedComponents : 1.5KW ER11 D65 110V Air cooled spindle motor + 1.5KW 110V QL Inverter + 65mm Bracket
ItemDisplayDimensions_Height : 7 inches
ItemDisplayDimensions_Length : 15 inches
ItemDisplayDimensions_Width : 12 inches
ItemLength : 7.5 inches
ItemName : 1.5KW ER11 D65 110V Air cooled spindle motor, 1.5KW 110V QL Inverter, 65mm Bracket spindle motor kit (1.5KW ER11 D65 110V)
ItemPackageDimensions_Height : 38.3286 centimeters
ItemPackageDimensions_Length : 18.0086 centimeters
ItemPackageDimensions_Width : 30.48 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : G-Penny Machine
Material : Aluminum
ModelName : 1.5KW ER11 D65 220V Air cooled spindle motor + 1.5KW 220V QL Inverter + 65mm Bracket
ModelNumber : 1.5KW ER11 D65 110V
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : PHO_0YKIIRPW
PowerSourceType : ac
ProductDescription : Spindle basic parameter: Size: 65 x 204mm Cooling: Air cooling Power: 1.5kw (1HP=0.735kw) Voltage：110v Frequency: 0-400Hz Speed: 0-24000rpm Runout Off: 0.01mm earing Type: 2X7002C P4 DT and 2X7002C P4 DT Full sealed angular contact bearings Collet:ER11 Grease Lubrication Inverter basic parameter: Power: 1.5kw Input Voltage: 110v (±20%) Input Phase: 1 or 3 phase Input Frequency: 50-60Hz (±5Hz) Output Voltage: 110v Output Phase: 3 phase Output Current:12A Output Frequency: 0-1000Hz Control Method: V/F control; Open-loop flux vector control
ProductSiteLaunchDate : 2024-03-04T09:39:20.071Z
Speed : 24000 rpm
Style : Z-Axis
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26101200
Voltage : 110 volts
Wattage : 1500 watts