Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 【Water-cooled spindle parameters】: size: 80*225mm/3.15*8.86in, speed 24000RPM, power: 1.5KW, voltage: 220V, current: 8A, frequency: 400HZ, shaft end connection: ER16Ø3.175-Ø10, bearing: 4 bearings (2*7004C/P4, 2*6002C/P4), runout: less than 0.005mm. CNC spindle motors are mainly used for engraving machines or in conjunction with frequency converters.
BulletPoint2 : 【ER16 standard collet】: can clamp workpiece diameter 3.175-10mm, CNC spindle chuck is quenched with manganese steel, the runout is less than 0.005mm, high precision, not easy to break the knife, and increase the stability of the working process. Dynamic balancing technology can effectively reduce noise during use.
BulletPoint3 : 【4 bearing design】: The water-cooled spindle motor uses 4 P4-level 2*7004C-2*6002C bearings, which have high precision, high density, and excellent stability and anti-rust performance. The speed of 24000RPM brings higher powerful power, improves work efficiency and processing accuracy.
BulletPoint4 : 【Cooling method】: Our woodworking water-cooled spindle motor adopts water circulation cooling, which cools the heat generated by the friction of the spindle due to high-speed rotation through water circulation, so that your spindle temperature is always kept below 40℃. Note: The water-cooled spindle must be used with a water pump, otherwise the spindle will break quickly. Pay attention to maintenance, change water frequently or use an industrial water cooler
BulletPoint5 : 【Wide range of uses】: Common materials for water-cooled motors are wood, molds, etc., which are suitable for craft manufacturing, wood processing, guardrails, factories, shipyards, home improvement and other fields. Note: This spindle cannot be used for stone and metal processing.
Color : One Color
ItemName : 1.5KW 220V ER16 400HZ 80 * 225mm Water Cooled Spindle Motor Kits, 4 Bearings Speed 24000RPM, For Woodworking Advertising Engraving Machine
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCGGGHHJE
ModelNumber : FCGGGHHJE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FCGGGHHJE
ProductDescription : Middle body diameter: φ80mm

Speed ​​regulation method: Change the spindle speed through a three-phase output inverter and adjust the inverter frequency.

Cooling method: water cooling

Power interface: Optional 4-pin waterproof aviation plug, marked with "1", "2", "3", "4", "1", "2", "3" aviation plugs connected to the inverter (U, V, W), connected to the inverter 4 to ground the device.

Power: 1.5kw

Voltage: 220v

Current: 8A

Frequency: 400Hz

Speed: 24000rpm

Jumping: less than 0.01mm

Bearing model: 2*7004C/P4, 2*6002C/P4

Number of phases: 4

collet: ER16 Ø3.175-Ø10

Lubrication method: grease lubrication

Main use: for non-metallic engraving such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc.

Packing list:

1 x water-cooled spindle motor

1 x ER16

1 x 4-hole aviation plug

2 x wrench
ProductSiteLaunchDate : 2024-08-10T12:11:41.627Z
Size : One Size
UnitCount : 1