Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Water-cooled spindle parameters: size: Ø80*190mm/3.15*7.5in, speed 24000RPM, power: 1.5KW, voltage: 220V, current: 6A, frequency: 400HZ, shaft end connection: ER11Ø3.175-Ø7, bearing: 3 bearings (2*7002C/P4, 1*7002C/P4), runout: less than 0.005mm. CNC spindle motors are mainly used for engraving machines or used with frequency converters.
BulletPoint2 : Three high-quality bearings: The upgraded bearings have two significant advantages: excellent stability and anti-rust performance. High speed (8000-24000R/min) and strong power bring higher efficiency than before.
BulletPoint3 : High-quality material: The CNC router spindle body is made of high-quality stainless steel and equipped with a pure copper rotor. The 4-hole aviation plug ensures the stability and safety of the input power, and the dust cover prevents dust from entering the fuselage.
BulletPoint4 : Noise reduction and water cooling: Our spindle has low working noise and avoids auditory fatigue. It uses water circulation to cool the heat generated when the spindle runs at high speed, and has a good heat dissipation effect. Note: The water-cooled spindle must be used with a water pump, otherwise the spindle will break quickly. Pay attention to maintenance, change water frequently or use an industrial water cooler
BulletPoint5 : Main application: For non-metallic engraving such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc.
Color : One Color
ItemName : 1.5KW 220V ER11 400HZ 80 * 190mm Water-cooled Spindle Motor Kits, 3 Bearings 24000RPM High Speed For CNC Router Engraving And Cutting Machine
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCGHHAGGJ
ModelNumber : FCGHHAGGJ
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FCGHHAGGJ
ProductDescription : Middle body diameter: φ80*190mm/3.15*7.5in

Speed ​​regulation: Change the spindle speed through the three-phase output inverter and adjust the inverter frequency.

Cooling method: Water cooling

Power interface: Optional 4-pin waterproof aviation plug, marked with "1", "2", "3", "4", "1", "2", "3" aviation plugs connected to the inverter (U, V, W), connected to the inverter 4 grounding equipment.

Power: 1.5kw

Voltage: 220v

Current: 6A

Frequency: 400Hz

Speed: 24000rpm

Runout: less than 0.01mm

Bearing model: 2*7002C/P4,1*7002C/P4

Number of phases: 3

Chuck: ER11 Ø3.175-Ø7

Lubrication method: grease

Main use: for non-metal engraving such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc.

Packing list:

1 x water-cooled spindle motor

1 x ER11

1 x 4-hole aviation plug

2 x wrench
ProductSiteLaunchDate : 2024-08-10T12:11:43.393Z
Size : One Size
UnitCount : 1