Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 【Technical parameters】: Specifications: Ø3.15*7.5 in/diameter 80*190mm; Power: 1.5KW; Voltage: 220V; Current: 6A; Chuck size: ER11; Bearing: 3 bearings (2*7002C/P4, 1*7002C/P4); Frequency: 400 Hz; Speed: 24000 R/min; Runout: less than 0.005 mm. CNC spindle motors are mainly used in engraving machines or with frequency converters.
BulletPoint2 : 【ER11 dynamic balancing collet】: ER11 chuck is quenched with manganese steel, with a runout of less than 0.005 mm, and can hold sizes of: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm, with high precision, not easy to break the knife, and increased the stability of the working process. Dynamic balancing technology can effectively reduce noise during use and avoid auditory fatigue.
BulletPoint3 : 【3 bearing design】: The water-cooled spindle motor uses 3 precision bearings (2*7002C/P4, 1*7002C/P4), with high precision, high density, high hardness, good stability and excellent anti-rust performance.
BulletPoint4 : 【Water-cooling design】: The scientifically designed water circulation cooling system has a good heat dissipation effect, which can quickly reduce the heat generated by the high-speed rotation of the spindle, ensure smooth operation and improve work efficiency.
BulletPoint5 : 【Wide application】: CNC water-cooled spindle is mainly used for engraving non-metallic materials such as wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS), etc., and can also be engraved on soft metal surfaces such as gold, silver, copper, aluminum, lead, etc.
Color : One Color
ExternallyAssignedProductIdentifier : 7864112565757
ItemName : 1.5KW 220V 3.15in Water-cooled Spindle Motor Kits, Speed 24000RPM, For CNC Woodworking Engraving Machine
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : Generic
ModelName : FCYCJBJGA
ModelNumber : FCYCJBJGA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FCYCJBJGA
ProductDescription : Speed ​​regulation method: Through the three-phase output inverter, adjust the inverter frequency to change the spindle speed.
Cooling method: water circulation cooling
Power interface: Optional 4-pin waterproof aviation plug, the aviation plug is marked with "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W) respectively, and 4 is connected to the inverter ground.
Dimensions: 80*190mm/3.15*7.5in
Speed: 24000RPM
Rated power: 1.5KW
Voltage: 220V
Current: 6A
Frequency: 400HZ
Shaft end connection: ER11Ø1-Ø7
Runout: less than 0.005mm
Bearing type: 2*7002C/P4, 1*7002C/P4 fully sealed angular contact bearing
Chuck: ER20 1mm-20mm
Tool diameter: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm
Cooling method: water circulation cooling
Lubrication method: grease
Main uses: engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, bamboo, two-color board (ABS) and other non-metallic materials, can also be engraved on the surface of soft metals such as gold, silver, copper, aluminum, lead, etc.

Packing list:
1 x water-cooled spindle motor
1 x ER11
1 x 4-hole waterproof aviation plug
1 x 13 wrench
1 x 17 wrench
ProductSiteLaunchDate : 2024-07-28T16:28:37.742Z
Size : One Size
UnitCount : 1