Specification Brand : JEGS BulletPoint1 : EASY TO CARRY with the help of a built-in handle BulletPoint2 : WELDING VOLTAGE AND WIRE FEED are adjusted with one control according to thickness of the welded sheet BulletPoint3 : LENGTH OF THE ARC/WELDING HEAT is trimmed with another control, and once the right value is found there usually is no need to change it even when welding a thicker or thinner sheet BulletPoint4 : ENJOY WELDING with freedom, flexibility, and ease of setting up and dialing in your welding project with the simple control design BulletPoint5 : SPECIFICATIONS: 220V AC, Duty Cycle: 25% @ 180A/60% @ 117A, Wire: 7.87 “ Reel x 0.030 “ - 0.035 “ ExternallyAssignedProductIdentifier1 : 0889944086376 ExternallyAssignedProductIdentifier2 : 889944086376 ItemName : JEGS MIG/MMA 180 Welder | 220V AC | Includes Gas Regulator, MMA Clamp, Welding Torch, Ground Clamp & Cable, Hand Held Mask, And Wire Brush ItemPackageDimensions_Height : 22.5 inches ItemPackageDimensions_Length : 21 inches ItemPackageDimensions_Width : 15 inches ItemPackageQuantity : 1 ItemTypeKeyword : mig-welding-equipment Manufacturer : JEGS NumberOfBoxes : 1 OeManufacturer : JEGS PartNumber : 81541 ProductDescription : MIG/Arc Welder180C220V ACDuty Cycle: 25% @ 180A/60% @ 117AIncludes:MIG Head & CableGas RegulatorArc Electrode Holder & CableGround Clamp & CableHand Held MaskWire Brush JEGS Welder Features:Two Welders in OneMIG: The wire feed welding technique can provide a strong weld for even very thin metals which makes MIG welding for assembling and repairing the body and or interior of any vehicle.Supports both 11 lb. and 2 lb. wire reels with either 0.030 in.-0.035 in. welding wireWelds up to 3/16 in. thick materialRequires shielding gas CO2 or Ar+CO2-mixed gases (not included)Welding voltage and wire feed speed are adjusted with one control according to the thickness of the welded sheet Arc: The arc electrode welding technique is the most economical welding method that provides the ability to create a good bond on rusty or dirty metals by melting the metal at the point of contact. It's used for welding thicker metals of 1/16 inch or greater such as tubing or frame rails.Requires welding rod (not included)Welds up to 3/16 in. thick materialThe length of the arc is adjusted with a heat trimmer control based on material thickness, and once the right value is found there usually is no need to change it even when welding a thicker or thinner metalEasy to use and is perfect for a novice or professionalSmall and efficient Unit carry with the help of a built-in handle17 in. x 8 in. x 13 in. x 28 lbs. ProductSiteLaunchDate : 2020-01-24T15:50:18.287Z Style : 4 Pieces SupplierDeclaredDgHzRegulation : not_applicable