Cart 2 india

Specification
Brand : CHNsalescom
BulletPoint1 : Fits Miller M Series Type Welding Gun Miller Mig Gun M-10, M-15, M-25, M-40, M-100, M-150, M31L, M32L, M33L, M34L, M38L, This gun was used on some Miller 130 and 130 XP welders, all Miller 135, 140, 175, 180, 185, 210, 212, 250X, 251, and 252 welders. Challenger 172, DVI. Fits Hobart Mig Gun H-10 Perfect replacement for MILLER GUN LINER 194010 194011 194012 194T-011 194T-012 194T-013
BulletPoint2 : Using the joint high temperature resistant nylon material customization, To replace the traditional metal joint conductive resulting in high temperature damage the welding torch cable Graphite wire feeding liner, has the very strong hardness and smoothness Can reduce wire maximum likelihood in the transmission process of wear Very suitable for aluminum wire and stainless steel wire welding requirements Suitable for aluminum welding wire and flux cored wire
BulletPoint3 : Teflon can be used continuously at a temperature of 260 ?, with the highest use temperature is 290-300 ?, extremely low friction coefficient, good wear resistance and excellent chemical stability
BulletPoint4 : Please check the wire feed wheel type of joint before purchasing, please confirm with the MIG gun you can joint matching You will receive 10cm longer than the length you choose In this way, you can install your welding torch and then cut to ensure 100% compliance with your welding torch length requirements
BulletPoint5 : Steel ----spring hose is suitable .023-.030-.035-.040-.045" welding wire Teflon---Blue is suitable .023-.030-.035" welding wire Teflon---Red is suitable .035-.040-.045" welding wire Teflon---Yellow is suitable .055-1/16-5/64" welding wire Graphite---OD: 4.0mm suitable .023-.030-.035-.040" welding wire Graphite---OD:4.7mm suitable .045-.055-1/16"-5/64" welding wire
Color : Teflon---Blue
ExternallyAssignedProductIdentifier1 : 0191229021133
ExternallyAssignedProductIdentifier2 : 191229021133
GpsrSafetyAttestation : 1
ItemName : CHNsalescom Mig Welding Liner Miller M Series Hobart MIG Gun Liner PTFE Graphite Steel (Teflon-Blue,15 feet)
ItemPackageDimensions_Height : 1.2 inches
ItemPackageDimensions_Length : 4.3 inches
ItemPackageDimensions_Width : 3.4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : mig-welding-equipment
Manufacturer : CHNsalescom
Material : Other
ModelNumber : 7-5207
NumberOfItems : 1
PartNumber : AMALL2023
ProductDescription : Fits Miller M Series Type Welding Gun
Miller Mig Gun M-10, M-15, M-25, M-40, M-100, M-150, M31L, M32L, M33L, M34L, M38L,
This gun was used on some Miller 130 and 130 XP welders,
all Miller 135, 140, 175, 180,  185, 210, 212, 250X, 251, and 252 welders. Challenger 172,  DVI.
Fits Hobart Mig Gun H-10
 Perfect replacement for MILLER GUN LINER 194010 194011 194012 194T-011 194T-012 194T-013
 
Using the joint high temperature resistant nylon material customization,
To replace the traditional metal joint conductive resulting
in high temperature damage the welding torch cable
  Graphite wire feeding liner, has the very strong hardness and smoothness
Can reduce wire maximum likelihood in the transmission process of wear
Very suitable for aluminum wire and stainless steel wire welding requirements
Suitable for aluminum welding wire and flux cored wire
Teflon can be used continuously at a temperature of 260 ?,
with the highest use temperature is 290-300 ?,
extremely low friction coefficient,
good wear resistance and excellent chemical stability
Please check the wire feed wheel type of joint before purchasing,
please confirm with the MIG gun you can joint matching
You will receive 10cm longer than the length you choose
In this way, you can install your welding torch and then cut to ensure
100% compliance with your welding torch length requirements

Steel ----spring hose is suitable .023-.030-.035-.040-.045"  welding wire
Teflon---Blue is suitable .023-.030-.035"  welding wire
Teflon---Red is suitable  .035-.040-.045"  welding wire
Teflon---Yellow is suitable .055-1/16-5/64"  welding wire
Graphite---OD: 4.0mm suitable .023-.030-.035-.040" welding wire
Graphite---OD:4.7mm suitable .045-.055-1/16"-5/64"  welding wire
ProductSiteLaunchDate : 2021-03-02T14:22:09.293Z
Size : 15 feet
Style : 220182 10pcs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 23271800