Cart 2 india

Specification
Amperage : 9 amps
Brand : FILFEEL
BulletPoint1 : [Mono or Stereo Option] Easily configure the microphone for mono or stereo output by setting the select pin to power or ground, ideal for versatile recording setups.
BulletPoint2 : [Easy Installation] The bottom, ported design ensures accurate sound capturing, while the 3.3v operating voltage makes it suitable for a wide range of devices.
BulletPoint3 : [high performance Audio Recording] The sph0645 i2s mems microphone offers a wide frequency range of 50hz - 15khz, making it for various audio recording applications.
BulletPoint4 : [Digital Functionality] With clock, data, and select pins, this microphone breakout board seamlessly integrates with microcontrollers and computers for data transmission.
BulletPoint5 : [Compatibility] Works well with cortex m, series chips like zero, m0, and single, board computers, providing a audio input solution.
CircuitBreakerType : Standard
Color : One Color
ConnectivityTechnology : XLR
ConnectorType : XLR
CurrentRating : 40 amps
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 7636987062781
ExternallyAssignedProductIdentifier1 : 0782113475578
ExternallyAssignedProductIdentifier2 : 782113475578
IncludedComponents : Base unit, Microphone, Pop shield, RJ45 lead
ItemDisplayWeight : 2 pounds
ItemName : I2S MEMS Microphone Breakout Board Module 50Hz, 15KHz for Audio Recording or Detection with Clock, Data, Left, Right (Word Select) Clock, Bottom, Ported Design
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : microphone-elements
Manufacturer : FILFEEL
Material : Plastic
ModelName : FILFEELtago1pn92y
ModelNumber : FILFEELtago1pn92y
NumberOfItems : 1
NumberOfPoles : 4
PackageLevel : unit
PartNumber : FILFEELtago1pn92y
PhaseType : Three Phase
ProductDescription : [Mono or Stereo Option] Easily configure the microphone for mono or stereo output by setting the select pin to power or ground, ideal for versatile recording setups.
[Easy Installation] The bottom, ported design ensures accurate sound capturing, while the 3.3v operating voltage makes it suitable for a wide range of devices.
[high performance Audio Recording] The sph0645 i2s mems microphone offers a wide frequency range of 50hz - 15khz, making it for various audio recording applications.
[Digital Functionality] With clock, data, and select pins, this microphone breakout board seamlessly integrates with microcontrollers and computers for data transmission.
[Compatibility] Works well with cortex m, series chips like zero, m0, and single, board computers, providing a audio input solution.

Spec:

Features:
The I2S is a small, low cost MEMS mic with a range of about 50Hz - 15KHz, good for just about all general audio recording / detection.
Instead of an analog output, there are three digital pins: Clock, Data and Left, Right (Word Select) Clock.
When connected to your microcontroller or computer, the 'I2S Master' will drive the clock and word, select pins at a and read out the data from the microphone.
The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground.
If you need stereo, pick up two microphones! You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
Specification:
Condition: brand new
VIN or logic: 3.3V
Package List:
1 x Microphone Breakout Board
Note:
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6, 3.6V device only, so
ProductSiteLaunchDate : 2024-11-04T02:33:33.468Z
Size : One Size
StreetDate : 2024-11-07T00:00:01Z
Style : 3HP 460V
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800
Voltage : 480 volts