Cart 2 india

Specification
AudioSensitivity : 62 decibels
Brand : Eujgoov
BulletPoint : sensors mic + 25 / D / TC
BulletPoint1 : 【Range Of 50Hz‑15KHz】This is a small MEMS microphone module with a range of about 50Hz‑15KHz, which can be used for almost all conventional audio recording and detection
BulletPoint2 : 【Higher Frequency】When connected to a microcontroller/computer, the I2S master device will drive the clock and word selection pins at a higher frequency, and read data from the microphone without analog conversion
BulletPoint3 : 【Left And Right Channels Can Be Selected】The left and right channels can be selected by connecting the Select pin to power or ground
BulletPoint4 : 【Three Digital Pins】In addition to the three analog pins, there are three digital pins: clock, data and left and right (word selection) clock
BulletPoint5 : 【Detect Sound Convert It To Voltage】MEMS microphone can detect sound and convert it to voltage without analog conversion
CompatibleDevices : default
ConnectorType : Pin
ExternallyAssignedProductIdentifier : 5601095503015
IncludedComponents : No
ItemName : Eujgoov Microphone Module I2S Interface Microphone Module, MEMS Microphone Module MEMS Mike Board with Pin Electronic Component SPH0645, Eujgoovobsniwac3g
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : microphone-elements
Manufacturer : Eujgoov
Material : Copper
MaximumVoltage : 3.3 volts
ModelNumber : Eujgoovobsniwac3g
NoiseLevel : 62 decibels
NumberOfItems : 1
PartNumber : Eujgoovobsniwac3g
PolarPattern : Omnidirectional
PowerSourceType : PowerSource
ProductDescription : 1. This is a small MEMS microphone module with a range of about 50Hz‑15KHz, which can be used for almost all conventional audio recording and detection.
2. In addition to the three analog pins, there are three digital pins: clock, data and left and right (word selection) clock.
3. When connected to a microcontroller/computer, the I2S master device will drive the clock and word selection pins at a higher frequency, and read data from the microphone without analog conversion.
4. MEMS microphone can detect sound and convert it to voltage without analog conversion.
5. The left and right channels can be selected by connecting the Select pin to power or ground.

Specification:
Item Type: Microphone Module
Color: Blue

PackageList:
1 x Module
1 x Pin

ProductSiteLaunchDate : 2024-06-04T19:26:09.838Z
SignalToNoiseRatio : 62 decibels
SupplierDeclaredDgHzRegulation : not_applicable
TerminalType : Pin Terminal
UnitCount : 1
UnspscCode : 52161520