Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : Haofy
BulletPoint1 : [WIDE APPLICATION]: Ideal for high voltage switchgear, auto parts, and more.
BulletPoint2 : [ECONOMICAL & EFFECTIVE]: Save money by repairing threads instead of replacing parts.
BulletPoint3 : [HIGH STRENGTH THREAD REPAIR]: Easily repair damaged internal threaded holes with this kit.
BulletPoint4 : [COMPLETE SET]: Includes everything you need for thread repair in a protective box for transportation.
BulletPoint5 : [CONVENIENT CONVERSION]: Quickly convert mm to inch threads with wire screw sleeves.
IncludedComponents : Repair Kit Lower Control Arm Adjust Bolt
ItemName : Thread Repair Sleeve 17 Pcs M12x1.5 High Strength Threaded Hole Repairing Tool for Auto Parts,Convenient and Fast
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-thread-repair-metric-kits
Manufacturer : Haofy
ModelName : Gloglowh6y8rdop4q
ModelNumber : Haofy5nve4t9gsm
NumberOfItems : 1
PartNumber : Haofy5nve4t9gsm
ProductDescription : 1. The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear and high accuracy.
2. In case of threading error or repair of a damaged internal threaded hole, the threaded hole can be economically and effectively repaired by using a threaded sleeve as a means of repair. The same screws can also be used after repair.
3. Applicable to high voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc. Threaded hole slip repair of parts, such as threaded hole repair of injection machine template. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
4. The use of wire screw sleeves for mm---inch threaded hole conversion is convenient and fast.
5. With a box and sponge for well and transportation.

Specification:
Item Type:Thread Sleeve
Material:Stainless Steel
Thread Insert Size:M12x1.5 Length:2D

packing list:
1 x Spiral Drill
1 x Screw Tap
1 x Wrench
1 x Break Pin Tool
1 x Hex Wrench
12 x Thread Repair Insert

Note:
Instructions
Drill holes using a matching drill bit.
Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.
Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.
Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.
When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.
ProductSiteLaunchDate : 2025-01-07T20:31:20.407Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31161500
WarrantyDescription : One Year Warranty