Cart 2 india

Specification
Brand : Wenol
BulletPoint1 : POLYCRYSTALLINE diamonds are recommended for microscopy, materialography, and where surface finish is extremely critical.
BulletPoint2 : Finest finishes for work of the highest precision. Used for optical, metallographic, ferrite, laser rod, and semiconductor finishing.
BulletPoint3 : DECK SEAM SAFE - Specially formulated to clean thoroughly while preserving the integrity of boat deck seams
BulletPoint4 : SPECIALIZED FOR MARINE USE - Specifically designed to avoid damage to painted or varnished surfaces on boats
BulletPoint5 : USE STEP 1 & 2 Together - Snappy Teak-Nu Formula No. 1 must be used with Snappy Teak-Nu Formula No. 2 to achieve the best results
BulletPoint6 : MADE IN USA QUALITY - Proudly produced in the United States, ensuring top quality and reliability
Capacity : 1 gallons
Color : #2 Formula 1 Gallon
CompatibleMaterial : Metal
ContainsLiquidContents : 1
Directions1 : Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.
Directions10 : Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.
Directions11 : To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.
Directions12 : Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.
Directions2 : FOR BADLY SOILED, OILED OR COATED TEAK
Directions3 : 1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use medium bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.
Directions4 : 2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.
Directions5 : FOR LIGHTLY SOILED TEAK
Directions6 : 1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brush thoroughly after use.
Directions7 : 2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over treated area. Use medium to soft bristle brush, scrubbing lightly to attain a uniform light color. Rinse treated area thoroughly.
Directions8 : When the treated area is completely dry, the deck will look like it has been freshly sanded.
Directions9 : HELPFUL SUGGESTIONS
ExternallyAssignedProductIdentifier1 : 0884920643864
ExternallyAssignedProductIdentifier2 : 0601525590504
ExternallyAssignedProductIdentifier3 : 884920643864
ExternallyAssignedProductIdentifier4 : 601525590504
FcShelfLife : 900 days
Hazmat : 9
Hazmat1 : HYDROCHLORIC ACID
Hazmat10 : DE_LimitedQuantity
Hazmat11 : EG_LimitedQuantity
Hazmat12 : ES_LimitedQuantity
Hazmat13 : FR_LimitedQuantity
Hazmat14 : GB_LimitedQuantity
Hazmat15 : IE_LimitedQuantity
Hazmat16 : IN_GroundOnly
Hazmat17 : IT_LimitedQuantity
Hazmat18 : JP_GroundOnly
Hazmat19 : MX_LimitedQuantity
Hazmat2 : UN1789
Hazmat20 : NL_LimitedQuantity
Hazmat21 : PL_LimitedQuantity
Hazmat22 : SA_LimitedQuantity
Hazmat23 : SE_LimitedQuantity
Hazmat24 : SG_LimitedQuantity
Hazmat25 : TR_LimitedQuantity
Hazmat26 : US_ORMD
Hazmat27 : ZA_LimitedQuantity
Hazmat28 : 8
Hazmat3 : III
Hazmat4 : AE_LimitedQuantity
Hazmat5 : AU_LimitedQuantity
Hazmat6 : BE_LimitedQuantity
Hazmat7 : BR_LimitedQuantity
Hazmat8 : CA_LimitedQuantity
Hazmat9 : CN_GroundOnly
Ingredients : cleaning spray
IsExpirationDatedProduct : 1
ItemDisplayWeight : 12.1 pounds
ItemForm : Liquid
ItemName : Set Of 4 WENOL MULTI-PURPOSE POLISH!!! NOW A BRIGHTER SHINE - FASTER! CLEANS AND POLISHES BRASS,COPPER,SILVER,BRONZE,CHROME,CERAMIC HOBS,ETC.
ItemPackageDimensions_Height : 35.8902 centimeters
ItemPackageDimensions_Length : 16.891 centimeters
ItemPackageDimensions_Width : 17.399 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : metal-polish
ItemVolume : 1 quarts
LiquidVolume : 1 gallons
Manufacturer : EMS
Material : Diamond
ModelName : Snappy Teak-Nu Part #2
ModelNumber : 50370-21
NumberOfBoxes : 1
NumberOfItems : 4
PackageLevel : unit
PartNumber : 50370-21
ProductDescription : Glennel diamond products are specially formulated to help you prepare surfaces that are usually difficult to polish and require precision finish. To satisfy today's demand the diamond compounds must be complex with near perfect tolerances as is ours.
ProductExpirationType : Shelf Life
ProductSiteLaunchDate : 2014-02-10T11:33:44.875Z
SafetyDataSheetUrl : https://starbrite.box.com/s/2ky5qb6i9zfd08u9x05m6np1k3ww1u8z
Scent : Unscented
Size : 0.25 µm/EA
SpecificUsesForProduct : Deck
Style : Water/Oil Soluble Polycrystalline
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : transportation
SupplierDeclaredDgHzRegulation2 : ghs
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Brass,Ceramic,Copper
UnitCount : 4
UnspscCode : 47131800