Cart 2 india

Specification
Brand : Sherline
BulletPoint : 8" Lathe with digital readout installed
BulletPoint1 : 4-Position Carriage Stop.
BulletPoint10 : Precision Polishing: Great for deburring, car sanding kits, and mini polisher tasks
BulletPoint2 : Chuck guards are standard equipment on all ELITE lathes for increased safety.
BulletPoint3 : Front facing chip pan allows easy chip removal from the front of the machine.
BulletPoint4 : Hardened and ground gears in headstock reduce vibration and deflection.
BulletPoint5 : Integrated locking tool cabinet in stand on 12" Lathe, Inverter drive system provides infinitely variable spindle speeds, LED RPM readout allows for precise turning speeds, Two speed gearbox allows low speeds from 40-365 RPM to high speeds from 165-2000 RPM.
BulletPoint6 : Powerful Versatility: Ideal for deburring, car detailing, and sanding
BulletPoint7 : Reduced Vibration and Noise: Designed to minimize vibration and noise for smoother use
BulletPoint8 : Compact and Portable: Cordless sander design allows flexibility in tight spaces
BulletPoint9 : Safety-Lock Design: Throttle lever prevents accidental start-ups
Color : Standard
ExternallyAssignedProductIdentifier : 00850030726919
ExternallyAssignedProductIdentifier1 : 0697478431797
ExternallyAssignedProductIdentifier2 : 697478431797
IncludedComponents : EVS LATHES
ItemName : Sherline 8 Inch Lathe w/DRO 4000-DRO
ItemPackageDimensions_Height : 0.375 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 5.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-metal-lathes
Manufacturer : Sherline
Material : Aluminum
Material1 : Alloy Steel
Material2 : Aluminum
Material3 : Metal
Material4 : Composite
MaximumRotationalSpeed : 54000 rpm
ModelName : JET Tools - E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment (892316)
ModelNumber : 892316
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : sher-4000-DRO
PowerSourceType : AC/DC
ProductDescription : Sherline 8 Inch Lathe w/DRO 4000-DRO
8 Inch Lathe w/DRO
Any Sherline lathe can be ordered with a digital readout installed. Special handwheels with built-in encoders are installed in place of the standard handwheels on the crosslide and leadscrew. These handwheels are connected to a display box that translates handwheel rotation into a readout of table position to within .0005? (or .01 mm). In addition, a constant readout of spindle RPM is displayed. The advantage of a digital readout is that you no longer need to count handwheel rotations when moving distances longer than a single revolution. This helps eliminate math errors. The large, easy-to-read display reads out to 3 and a half decimal places to give accuracy to within .0005?. The display for each axis can be reset to zero at any time with the push of a button.
Backlash values can be set for each axis in the programming so that backlash is electronically eliminated when changing the direction of handwheel rotation. A third axis is available on the display box should you later decide to add a vertical milling column or use it on a Sherline 3-axis mill.The readout can function with inch or metric lathes. In the metric mode, the position reads out to 1/100 of a millimeter.
NOTE: The unit does not translate dimensions from inch to metric. It must be initialized to work with the pitch of the leadscrew to which the handwheel is attached.
Standard equipment for the lathe includes:

A powerful 90V DC motor with electronic speed controller*
2.75? (70mm) x 6.0? (152mm) crosslide
15? (381mm) steel bed to allow 8? (203mm) between centers
Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO lathes are outfitted with the special DRO 2? (51mm) handwheels on the leadscrew and crosslide feed screw, and a a standard 1-5/8? (41mm) handwheel on the tail
ProductSiteLaunchDate : 2021-02-04T19:52:59.454Z
Size : Hand
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23242100