Specification AgeRangeDescription : Kid Brand : Sherline BulletPoint : 10″ Mill XYZ base BulletPoint1 : cutting tools BulletPoint2 : A rocker tool BulletPoint3 : For the Sherline Mill BulletPoint4 : Please note: Base cannot be used until a stepper motor (not included) is installed BulletPoint5 : Muti-Functional: Acrylic Nail Drill comes with 12 drill bit for Multiple Uses: manicure, Carving, engraving, cutting, routing, grinding, sharpening, sanding, polishing. The electric nail file can be used for natural nails as well as artificial nails, for professional studio use or home use. Color : Pink EducationalObjective : 1 ExternallyAssignedProductIdentifier1 : 0731882165098 ExternallyAssignedProductIdentifier2 : 731882165098 IncludedComponents : No ItemName : Sherline 7603-1/4"-3/8" 2-position Rocker Tool Post ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 18 centimeters ItemPackageDimensions_Width : 9 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : power-metal-lathes Manufacturer : Sherline Material : Aluminum ModelName : Grinder 06 ModelNumber : Grinder 03 NumberOfBoxes : 1 NumberOfLithiumMetalCells : 1 NumberOfPlayers : 1 OperationMode : Manual PartNumber : sher-7603 PowerSourceType : ac ProductDescription : Sherline 7603 - 1/4"-3/8" 2-position Rocker Tool Post The P/N 40180 Sherline 1/4" tool post comes standard with 4000-series lathes and is intended to hold 1/4" HSS or brazed tip carbide cutting tools that are ground to the proper height. A rocker tool post P/N 3057 comes standard or 4400-series lathes. The rocker allows the height of the tool tip to be adjusted to accommodate tools that may have been ground a little above or below the part centerline. A 3/8" holder P/N 7600 will accommodate 3/8" round or square shank cutting tools. Now Sherline offers an optional 2-positon tool post that will hold both 1/4" and 3/8" square shank tools and also has the rocker feature on each side to allow for adjustment of the tool tip height. The 3/8" side is designed to fit the larger 3/8" square tool holders commonly used for carbide or diamond inserted tips. It will also hold Sherline's own P/N 2256 (RH) and 2257 (LH) 35° inserted tip and other 3/8" tool holders. It is machined from solid aluminum and has a black anodized finish. Purchase of this tool post will allow you to keep both your standard 1/4" high-speed steel tools set up for jobs where they are sufficient and also have a 3/8" carbide insert tool ready for jobs where it is required. Simply loosen and rotate the tool post 180° and your new tool is in position. NOTE: Carbide inserts and inserted tip tools are available through Sherline. See our page on carbide tools.