Cart 2 india

Specification
Brand : Sherline
ExternallyAssignedProductIdentifier1 : 0731236489351
ExternallyAssignedProductIdentifier2 : 731236489351
ItemName : Sherline 4417Z - Lathe Leadscrew Backlash Lock
ItemPackageQuantity : 1
ItemTypeKeyword : power-metal-lathes
Manufacturer : Sherline
Material : Aluminum
PartNumber : sher-4417Z/18019
PowerSourceType : ac
ProductDescription : Sherline 4417 - Lathe Leadscrew
Backlash Lock
CNC machining operations require precise leadscrew movement to
producing a good part. The normal backlash of .003" to .005" can be
unacceptable in these situations and a way was needed to reduce
backlash to the .001" to .002" range. This solution was developed
for the Z-axis on the mill, but it has been adapted here to work on
the lathe as well.
Sherline lathes have never been fitted with locking levers on
the leadscrew. This system was developed specifically for use on
CNC machines. The new retrofit installation kit includes a new
locking lever and a new saddle nut without a spring loaded ball to
hold it in the unlocked position. The positive locking arm allows
partial locking of the lever to reduce backlash to a minimum. The
small detent in the locking lever that was formerly used to engage
a spring-loaded ball has been retained to indicate the side of the
locking lever that should be facing the saddle nut. If the locking
lever should fail to lock against the saddle nut within the
available arc in the back of the mill column, check to see if the
lever has been installed backwards.

ProductSiteLaunchDate : 2015-08-04T15:36:01.574Z
SpecificUsesForProduct : General Purpose
Voltage : 110 volts