Cart 2 india

Specification
Brand : Sherline
BulletPoint : NR50V1-S
BulletPoint1 : 4 Jaw independent chuck
BulletPoint2 : NEW addition to Sherline chucks selection
BulletPoint3 : Achieve perfect centering with proper adjustment
BulletPoint4 : Offers best accuracy!
BulletPoint5 : 22 x 1.5 mm thread for use on ER-16 spindles
ExternallyAssignedProductIdentifier : 4902870095062
ExternallyAssignedProductIdentifier1 : 0738759767478
ExternallyAssignedProductIdentifier2 : 738759767478
ItemName : Sherline 1032 - ER-16 4-Jaw Independent
ItemPackageDimensions_Height : 27.7 centimeters
ItemPackageDimensions_Length : 13.9 centimeters
ItemPackageDimensions_Width : 20.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-metal-lathes
Manufacturer : Sherline
Material : Aluminum
ModelNumber : NR50V1-S
PartNumber : sher-1032
PowerSourceType : ac
ProductDescription : Sherline 1032 - ER-16 4-Jaw Independent 
Four-jaw chucks have jaws that adjust one at a time. They are used to hold round, square or rectangular work. Since the jaws adjust independently, it is possible to achieve perfect centering of the part with proper adjustment. This process is more time consuming than using a 3-jaw chuck, but it offers the most accuracy. Sherline's 3.1" 4-jaw independent chuck is now available with a 22 x 1.5 mm thread for use on ER-16 spindles.
NOTE
The chuck should not be used in applications where spindle speed exceeds 3000 RPM. If purchasing any of these chucks for use on a non-Sherline ER-16 spindle, confirm that the spindle nose thread is 22 x 1.5 mm before purchasing. The Sherline chuck has a collar that is machined flat at the back to seat against the face of the Sherline ER-16 spindle. This may not be compatible with some non-Sherline ER-16 collet adapters or industrial tool holders. Runout accuracy cannot be guaranteed unless used with a Sherline spindle.
 

ProductSiteLaunchDate : 2014-08-29T17:46:13.093Z
Voltage : 110 volts