Cart 2 india

Specification
Brand : INTSUPERMAI
BulletPoint1 : [Imperial/Metric Lathe&New Gearless Design]Switching between imperial and metric is no longer required by changeing gears.Only operate through the panel can get it.New gearless design. Brand new belt drive. Low noise , no longer need to change gears to adjust the processing thread. Only need to operate on the panel. Equipped with three jaw and four jaw chuck, choose which chuck to use according to the situation.Processing efficiency greatly improved.
BulletPoint2 : [Main Parameters]Length of center:31.50"(800mm), Swing Over Bed:8.27"(210mm), Rotary diameter of tool rest:5.51"(140mm), Diameter of chuck:4.92"(125mm), Width of lathe bed:3.94"(100mm), Spindle rotation speed:50-2500rpm, Power:1100W Brushless Motor.
BulletPoint3 : [800mm Swing Range]The bench top lathe brings a 3-jaw Chuck with Diameter: 4.92"/125mm.Range of metric threads:10-44T.P.I.Precision of the spindle: 0.01mm.
BulletPoint4 : [Simple Operation] Three ways to start turning: manual start, automatic start, delay automatic start.Can switch the direction of turning tool through "DIR" button; Angles can be cleared with one click.Control panel set parameters after saving and start, can realize reciprocating turning function and turning thread.
BulletPoint5 : [Scale]Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement. Used for turning, facing, drilling, boring and turning thread.
BulletPoint6 : USER FRIENDLY CONTROLS: The lathe features an intuitive control panel with a one-button start and stop switch, as well as forward and reverse switching capabilities. This makes it easy for operators to manage the lathe's operation, even during complex or lengthy machining processes, enhancing convenience and safety
Color : Gray
CutType1 : Rounded
CutType2 : Taper
ExternallyAssignedProductIdentifier1 : 0840403731473
ExternallyAssignedProductIdentifier2 : 840403731473
IncludedComponents : RC-210E 8" x 32" Metal Lathe × 1, 3 Jaw Chuck× 1, 4 Jaw Chuck × 1, Chuck Jaw × 3, The Screwdriver ×2, Open spanner ×2, Hexagon Wrench ×5, Chuck Spanner ×1, Oil can × 1 , Oil pan × 1 , Manual *1
IncludedComponents1 : 1 X Mini Metal Lathe
IncludedComponents2 : 1 X Center Rest
IncludedComponents3 : 1 X Accessory Set
IncludedComponents4 : Fork wrench *2/ Metal gear *12(24/30/40/48/50/52/60/60/66/70/72/75)
IncludedComponents5 : The screwdriver *2/Fuse *1
ItemName : INTSUPERMAI 8"× 32" Metal Lathe Precision Benchtop Metal Lathe Electronic Leadscrew Gearless Hobby DIY Metal Lathe 50-2500rpm Variable Speed with 4 Jaw/3 Jaw Chuck 110V
ItemPackageDimensions_Height : 18.11 inches
ItemPackageDimensions_Length : 49.2 inches
ItemPackageDimensions_Width : 18.9 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : power-metal-lathes
Manufacturer : INTSUPERMAI
Material : Steel
MetalType : cast iron
ModelName : Metal Lathe
ModelNumber : SMS-028401
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : SMS028401
PowerSourceType : ac
ProductDescription : Product Parameters
Model: RC-210E
Voltage: AC110V 50/60Hz(Brushless Motor)
Power: 1100W(1.5HP)
Length of center: 31.50"(800mm)
Swing Over Bed: 8.27"(210mm)
Rotary diameter of tool rest: 5.51"(140mm)
Spindle bore: 1.50"(38mm)
Diameter of chuck: 4.92"(125mm)
Width of lathe bed: 3.94"(100mm)
Thread standard: Metric/imperial/customized
Turning delay start time: 1s-30s
Number of Spindle Speeds: Infinitely variable speeds
Range of Inch Threads: 10-44T.P.I
Range of metric threads: 0.5mm-3mm
Spindle taper: MT5
Knife rest labour: Horizontal four-station
Spindle rotation speed: 50-2500rpm
Precision of the spindle: 0.01mm
Automatic feed range: 0.01mm-0.4mm
Tail frame taper: MT2
Maximum stroke of tool rest plate: 2.16"(55mm)
Maximum stroke of middle plate: 2.95"(75mm)
Maximum stroke of bottom plate: 26.77"(680mm)
Maximum stroke of tailstock sleeve: 2.36"(60mm)
Package size: 49.2"*18.9"*18.1"(125cm*48cm*46cm)
ProductSiteLaunchDate : 2023-11-06T05:15:33.624Z
Size : 8"× 32" Inch/Metric Thread
SpecificUsesForProduct : General Purpose
Style : Metal Lathe
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23242100
Voltage : 110 volts_of_alternating_current
Wattage : 1100 watts