Cart 2 india

Specification
Brand : Banfluxion
BulletPoint1 : 【Metal Gear】This mini metal lathe is equipped with metal gear of wear resistance and accurate tansmission. It improves the service life of the lathe greatly.
BulletPoint2 : 【Infinitely Variable Speed】The spindle speed of the lathe is divided into high and low two gears: 50-1250rpm/m and 1250 -2500rpm/m, allowing both forward and reverse. The digital display panel of rotation speed is clear, which is convenient to operate.
BulletPoint3 : 【Safety Switch】This mini metal lathe has the emergency stop switch. It can stop immediately if there is something wrong during operation, which can keep the operator from being hurt.
BulletPoint4 : 【Tool Post】The tool post of this metal lathe is 4-way adjustable. You can easily change your cutting tools.
BulletPoint5 : 【Wide Application】This mini metal lathe can be applied for metal turning, screw threading, internal and external thread, wood turning, turning and polishing and so on.
ExternallyAssignedProductIdentifier1 : 0840403799534
ExternallyAssignedProductIdentifier2 : 840403799534
ItemName : BANFLUXION AC110V WM210V 8''X16'' Precision Inch Thread Metal Lathe with 900W Brushless Motor Mini Variable Speed Metal Lathe
ItemPackageDimensions_Height : 20.28 inches
ItemPackageDimensions_Length : 35.83 inches
ItemPackageDimensions_Width : 18.31 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-metal-lathes
Manufacturer : Banfluxion
ModelName : Eujgoov2b0zcgx846-12
ModelNumber : Eujgoov2b0zcgx846-12
PartNumber : CB028033
ProductDescription :

Product Parameters:

Model: WM210V

Motor: 110V brushless motor

Voltage: AC110V 50/60Hz

Power: 900W

Length of center: 15.7"（400mm）

Swing Over Bed: 8.3"（210mm）

Rotary diameter of tool rest: 5.51"（140mm）

Spindle bore: 1.50"（38mm）

Diameter of chuck: 4.92"（125mm）

Width of lathe bed: 3.94"（100mm）

Number of Spindle Speeds: Infinitely variable speeds

Spindle taper: MT5

Knife rest labour: Horizontal four-station

Spindle rotation speed: 50-2500rpm

Range of metric threads: 0.5-3mm

Range of Inch Threads(optional accessory ): 10-44T.P.I

Precision of the spindle: 0.01mm

Automatic feed range: 0.1mm-0.2mm

Maximum stroke of tool rest plate: 2.16"（55mm）

Maximum stroke of middle plate: 2.95"（75mm）

Maximum stroke of bottom plate: 10.87"（276mm）

Maximum stroke of tailstock sleeve: 2.36"（60mm）

Tail frame taper: MT2

Lathe sizes: 31.9"*11.8"*13.8"（81*30*35cm）

Item Included:

WM210V lathe * 1

Chuck Jaw * 3

Gear *11 (75/72/70/66/60/60/52/50/48/40/30)

The Screwdriver * 2

Open spanner *2

Hexagon Wrench *5

Oil can * 1

The Fuse * 1

Chuck Spanner *1

English Instruction Manual *1

Oil pan * 1

ProductSiteLaunchDate : 2024-06-21T07:26:30.548Z
Size : US Plug
UnitCount : 1
Voltage : 110 volts_of_alternating_current
Wattage : 900 watts