Specification Brand : Yctze BulletPoint1 : You can choose from 100g or 500g set to meet different needs. BulletPoint2 : 【Before Use】: Before using the balance, make sure it is placed on a horizontal table and cannot be tilted; make sure that there is no liquid and powder in the trays at both ends of the balance; needs to be reset to 0; adjust the balance nut so that the balance pointer points to the middle. BulletPoint3 : High calibration accuracy, reliable and accurate data, accurate weight weight, and stored in the weight box to avoid oxidation. BulletPoint4 : The data is accurate, the scale is clear and responsive. BulletPoint5 : You can choose a combination of 100 grams or 500 grams to meet the different needs of the laboratory. Color : Black ExternallyAssignedProductIdentifier : 1037824047781 IncludedComponents : scale ItemName : Yctze Mechanical Balance Scale Tray and Weight Kit for Physics and Chemistry Teaching, Experiment Equipment Accessory (100g) ItemPackageDimensions_Height : 9 centimeters ItemPackageDimensions_Length : 20 centimeters ItemPackageDimensions_Width : 16 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : science-lab-mechanical-balances Manufacturer : Yctze Material : aluminum alloy, rubber, ABS Material1 : Acrylonitrile Butadiene Styrene Material2 : Alloy Steel ModelName : Yctze0u9p27vriq-11 ModelNumber : Yctze0u9p27vriq-11 PartNumber : Yctze0u9p27vriq-11 ProductDescription : 1. The data is accurate, the scale is clear and responsive. 2. Selected materials, more brackets with metal. 3. Rugged and , the tray is made of drop-resistant plastic to avoid accidental damage. 4. Streamlined design is more beautiful without affecting the function and avoiding injury to the hand. 5. You can choose from 100g or 500g set to meet different needs.
Spec: Item Type:Balance Scale Set Type:500g Set/100g Set(Optional)
PackageList: 500g Set: 1 x Balance Scale 2 x Tray 1 x Tweezers 1 x 10g Weight 2 x 20g Weight 1 x 50g Weight 2 x 100g Weight 1 x 200g Weight
100g Set: 1 x Balance Scale
2 x Tray 1 x Tweezers 1 x 50g Weight 2 x 20g Weight 1 x 5g Weight 1 x 10g Weight
Note: Use and maintenance methods: 1. When using the balance, it should be placed on the flat workbench. 2. Move the cursor to the 0 point on the left end of the ruler: the pointer should be aligned with the center line of the header to obtain balance. Otherwise, the balance nut on the lever should be turned to adjust the balance. 3. After the balance is adjusted, place the object to be weighed in the left disk, and add the weight from the big to the small in the right disk. Try to put the item and weight in the center of the weighing plate, when increasing or decreasing to the minimum. When the weight is still unbalanced, the movable code can be balanced. The mass of the object is equal to the sum of the mass of the weight and the mass of the travel code. 4. After the weighing is completed, the travel code should be returned to the 0 scale and the weight should be put back into the weight box.