Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : FYYKXWD
BulletPoint1 : Purpose: To demonstrate the pressure exerted by liquids on the bottom and side walls of a container; The pressure of the liquid on the side wall of the container increases with depth;
BulletPoint2 : At the same depth, the pressure of the liquid is equal in all directions.
BulletPoint3 : The product mainly consists of a sink, measuring cylinder, small cylinder, cylinder seat, small hole rubber stopper, pressure gauge, rubber band, wire, etc.
BulletPoint4 : When the inner and outer water surfaces are level, the rubber film becomes flat, indicating that the rubber film is subjected to equal upward and downward pressure from the water.
BulletPoint5 : 【Easy to Understand】: Simply pull onto the bottom rubber section to view of how the lungs work, apparatus that consists of two sacs, which represent the lungs, a rubber membrane.
Color : One Color
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 8258610050669
ItemName : U-Shaped Tube to Wall Equipment and Instruments Demonstration Device for The Relationship Between Internal Pressure and Depth of Liquids
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-classroom-measurement-kits
Manufacturer : FYYKXWD
ModelName : FYYKXWD
ModelNumber : FYYKXWD
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FYYKXWD
ProductDescription : Material: Glass, Plastic
Weight: Approximately 360g per set
Purpose: To demonstrate the pressure exerted by liquids on the bottom and side walls of a container; The pressure of the liquid on the side wall of the container increases with depth; At the same depth, the pressure of the liquid is equal in all directions.
The product mainly consists of a sink, measuring cylinder, small cylinder, cylinder seat, small hole rubber stopper, pressure gauge, rubber band, wire, etc.
1. Place the small tube on the large tube with the bottom facing up, fill it with water, and open three small holes to see inside the small tube
The water sprayed out from three small holes, and the lower the hole, the faster the water sprayed, indicating that the pressure of water on the sidewall increases with depth.
Plug the three small holes of the small tube with rubber stoppers, then fill half of the tube with water. Tie a rubber film at the mouth of the tube and invert it. Pull out the rubber stopper of the small hole to see that the rubber film protrudes downward, indicating that the bottom of the tube is under water pressure. Then put it into the large tube containing water. When the inner and outer water surfaces are equal, the rubber film becomes flat, indicating that the rubber film is under equal upward and downward pressure from water.
ProductSiteLaunchDate : 2024-10-31T14:16:54.312Z
Size : One Size
UnitCount : 1
UnspscCode : 31162400