Cart 2 india

Specification
Brand : CRL
BulletPoint1 : Age and Weather Resistant Butyl Rubber Formula
BulletPoint2 : 100% Solids Content
BulletPoint3 : Meets AAMA Certification
BulletPoint4 : Used as an Exterior Primary Spacing and Glazing Seal
BulletPoint5 : Available in Gray and Black
BulletPoint6 : Carrier/Backing: bleached flatback paper. Adhesive: natural rubber/resin.
BulletPoint7 : Applications : Bonding and Mounting - General Manufacturing Composite BondingMilitary
BulletPoint8 : Industries : Aerospace, Appliance, Auto Aftermarket, Consumer, General Manufacturing, HVAC, Transportation
Color : Black
CompatibleMaterial : Plastic
CompatibleMaterial1 : Wood
CompatibleMaterial2 : Paper
CompatibleMaterial3 : Glass
CompatibleMaterial4 : Plastic
CompatibleMaterial5 : Rubber
CompatibleMaterial6 : Metal
CustomerPackageType : 1
ExternallyAssignedProductIdentifier : 00055843701102
ExternallyAssignedProductIdentifier1 : 888519160251
ExternallyAssignedProductIdentifier2 : 0888519160251
ExternallyAssignedProductIdentifier3 : 00888519160251
IncludedComponents : Double-Sided Flatback Paper Tape
ItemDisplayDimensions_Height : 2.13 inches
ItemDisplayDimensions_Length : 1.56 inches
ItemDisplayDimensions_Width : 1.56 inches
ItemDisplayWeight : 0.13 pounds
ItemName : CRL Black 1/8" x 3/8" Butyl Architectural Tape - 24 rolls
ItemPackageDimensions_Height : 20.32 centimeters
ItemPackageDimensions_Length : 11.176 centimeters
ItemPackageDimensions_Width : 11.684 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : masking-tape
Language : english
Manufacturer : C.R. Laurence
Material : Rubber
ModelNumber : GT204
NumberOfItems : 24
PackageLevel : unit
PartNumber : GT204-XCP24
ProductDescription : Age and Weather Resistant Butyl Rubber Formula 100% Solids Content Used as an Exterior Primary Spacing and Glazing Seal Designed to Compress 10% between Two Surfaces CRL Butyl Architectural Tape is an extruded, preformed architectural glazing tape furnished on release paper rolls. Based on a butyl rubber formulation with proven age and weather resistant properties, it is designed to create a long lasting, flexible weather seal between two surfaces which will be subjected to normal expansion/contraction and wind loading forces. It is used as an exterior primary spacing and glazing seal when glazing glass into a window sash; also used to seal other architectural surfaces such as metal to metal joints, wood to glass, metal to plastic, etc. The thickness is designed to be compressed approximately 10 percent at installation to accommodate surface alignments. Color: Black Thickness of Tape: 1/8 in (3 mm) Width of Tape: 3/8 in (9.5 mm) Feet per Roll: 25 ft (7.6 m) Minimum Order: 1 Case - 24 Rolls Additional Product Information: GOOD GLAZING PRACTICES: The following "Good Glazing Practices" are recommended when using CRL Glazing Tapes. Surfaces to be adhered should be free of frost or standing water, brushed clean, solvent washed (MEK, Toluene or Naptha) and wiped dry. At installation, positive contact and approximately 10 percent compression is recommended to fully marry surfaces to be joined. Glazing tapes kept under compression with clips or wedges provide the best seals. Always use setting blocks (80 durometer Shore "A" hardness) placed at the sill quarter points. Spacing shims are recommended to accommodate wind loading when glass lite is over 100 united inches (50 durometer Shore "A" hardness). Tape placement on the sill rabbet is not to be below the sight line unless a cap bead is specified, then tape is placed 3/16 inch (4.76 millimeters) below the sight line to
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2007-10-04T18:29:13-00:00
RecommendedUsesForProduct : Indoor, Painting, Electrical
Size : 1/8" x 3/8"
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Floor
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Glass
SurfaceRecommendation4 : Wood
UnitCount : 180
UpperTemperatureRating : 200 degrees_fahrenheit
WaterResistanceLevel : waterproof