Cart 2 india

Specification
Brand : KIMISS
BulletPoint1 : [LESS STEEL BEAD] The connector has built in high strength less steel bead, with tight buckle, and the operation is simple.
BulletPoint2 : [LESS STEEL BEAD] The connector has built in high strength less steel bead, with tight buckle, and the operation is simple.
BulletPoint3 : [LESS STEEL BEAD] The connector has built in high strength less steel bead, with tight buckle, and the operation is simple.
BulletPoint4 : [APPLICABLE SCENES] Widely used in engineering projects such as factories, automation equipment, auto repair, electronics, etc.
BulletPoint5 : [WORKING PRESSURE] Working pressure is 0‑0.9Mpa (0‑0.92kfGcm²), with standard G1/4 thread, wide application range.
Color : 2 Points and 3 Place
ExternallyAssignedProductIdentifier : 7630860191100
ExternallyAssignedProductIdentifier1 : 0669980232186
ExternallyAssignedProductIdentifier2 : 669980232186
ItemName : G1/4 Air Distribution Block Straight Air Hose Splitter Pneumatic Manifold with Connector Professional Accessories (SML-5)
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : manifold-fittings
Manufacturer : KIMISS
ModelName : KIMISSntx4e7fzih-14
ModelNumber : KIMISSntx4e7fzih-14
PartNumber : KIMISSntx4e7fzih-14
ProductDescription : 1. [ALUMINUM MATERIAL] The air distribution block is made of pure aluminum, wear and resistant, and not easy to .
2. [STAINLESS STEEL BEAD] The connector has built in high strength stainless steel bead, with tight buckle, and the operation is simple.
3. [EASY TO INSTALL] The multiple way manifold block is small and compact, easy to install and has good airtightness.
4. [WORKING PRESSURE] Working pressure is 0‑0.9Mpa (0‑0.92kfg/cm²), with standard G1/4 thread, wide application range.
5. [APPLICABLE SCENES] Widely used in engineering projects such as factories, automation equipment, auto repair, electronics, etc.

Spec:
Item Type: Air Distribution Block
Material: Aluminum + Stainless Steel
Pressure Resistance: 1.0MPA (10kgf/cm)
Working Pressure: 0-0.9Mpa (0-0.92kfg/cm²)
Adaptation Temperature: 0-60℃
Connector Inner Diameter: Approx. 13mm / 0.5in
Specification:
Model Total Length Ways / Holes Length x Width Thread Center Spacing
SML-2 65mm / 2.6in 2 Ways 5 Holes 20 x 20mm / 0.8 x 0.8in G1/4(12mm) 30mm / 1.2in
SML-3 95mm / 3.7in 3 Ways 6 Holes
SML-4 125mm / 4.9in 4 Ways 7 Holes
SML-5 155mm / 6.1in 5 Ways 8 Holes
SML-6 185mm / 7.3in 6 Ways 9 Holes

PackageList:
1 x Air Distribution Block

Note:
1. Do not unplug and insert the hose frequently during the use of the connector, which will affect the service life of the connector and hose
2. The pipe inserted into the connector needs to be inserted to the bottom of the joint to avoid the possibility of air leakage
3. When pulling out the hose, first confirm that there is in the tube, press the end of the joint to the end and pull out the hose
4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.


ProductSiteLaunchDate : 2024-07-03T13:47:39.868Z
Size : SML-5
UnitCount : 1
UnspscCode : 40141700