Cart 2 india

Specification
Brand : Manesi
BulletPoint1 : Product Name: Magnetic Door Switch Model: RC-33
BulletPoint2 : Actuation Distance: 15-25mm ; Max. Current: 0.5A; Max. Contact Power: 10W ; Max. Working Voltage: 110V
BulletPoint3 : Material: ABS (Housing) Wire Type: 1007UL#24AWG,Color: White, Net Weight: 36g
BulletPoint4 : NC means Normally Closed:When the magnet together, the circuit is conductive( light on ); when the magnet separate, the circuit is not conductive ( light off ). When make order,pls check carefully!
BulletPoint5 : Package Content: 10 x Magnetic Door Switch
CurrentRating : 0.5 amps
IncludedComponents : NO
ItemName : Magnetic Door Switch RC-33 NC Recessed Wired Security Window Door Contact Sensor Alarm White - (10 Sets)
ItemPackageDimensions_Height : 10.5 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 6.2 centimeters
ItemTypeKeyword : magnetic-switches
Manufacturer : Manesi
Material : Plastic
MaximumSupplyVoltage : 100 volts_of_direct_current
MeasuringRange : 13mm - 23mm
ModelNumber : RC-33
MountingType : Door Mount
NumberOfItems : 10
OutputType : Digital
PartNumber : IITG-444
ProductDescription : Installation Instructions

1. Drill installation hole with a diameter of 10 mm.

2. The door and window magnet should be installed at the closed position of the door/window/drawer.

3. The magnet part is installed in the movable door and window. The switch part is installed in the fixed door and window frame. The switch part and the magnet part should be aligned as much as possible.

4. The door magnet should be away from the strong magnetic field interference source such as a transformer. Otherwise, the working characteristics of the door magnet will be changed and possible wrong actions.

5. The door magnetic switch is a glass-encapsulated switch. When installing, be careful not to use too much force or savage installation, which is easy to damage. If the voltage and current are too large, the switch will also be damaged.


Note

1. The Magnetic Door Switch must be installed according to the sensing distance;

2. It can only provide a switch signal to the device, which cannot directly load the power, nor directly connect the lamp! About Normally Closed and Normally Open


N.C

NC means Normally Closed: When the magnet together, the circuit is conductive( light on ); when the magnet separates, the circuit is not conductive ( light off ). When make order, pls check carefully!

ProductSiteLaunchDate : 2022-03-15T07:44:42.982Z
SensingDistance : 18 millimeters
SpecificUsesForProduct : Contact Sensor
Style : Magnet,Magnetic
UnspscCode : 39122200