Cart 2 india

Specification
Amperage : 13.5 amps
Brand : Hougen
BulletPoint1 : ✔️The HMD918 has a high torque motor and extended six inch drilling depth to give metal fabricators more options to drill deep holes in steel whether it is a solid piece of material or multiple stacked plates.
BulletPoint2 : ✔️Large 7/16" - 2-3/8" (up to 3" DOC) & 13/16" - 1-3/16" (21mm - 30mm) (4" & 6" DOC) Capacity.
BulletPoint3 : ✔️Powerful high torque Hougen motor and gears, Two speed gearbox - 250 & 450 RPM, Feed handles quickly change from side to side, Lift detector safety system.
BulletPoint4 : ✔️Pilot light for low light conditions and greater hole accuracy, Pressurized coolant system for increased productivity & better coolant flow for deep hole drilling, Two stage magnet. Engages full power only when motor is turned on which increases magnet life.
BulletPoint5 : ✔️Includes: Hougen HMD918 (0918102), Pressurized Coolant System for Increased Productivity, Safety Chain, Hex Wrenches & Case. Made in the USA.
BulletPoint6 : Highly-visible digital readout gives users precise speed control
BulletPoint7 : Backed by Wilton's industry-leading five-year warranty against manufacturing defects
Color : Silver/Blue
Color1 : Blue
Color2 : Black
Color3 : Silver
DrillType : drill_press
ExternallyAssignedProductIdentifier1 : 662850023693
ExternallyAssignedProductIdentifier2 : 0662850023693
IncludedComponents : Hougen HMD918 (0918102), Pressurized coolant system(1), Operator’s Manual, Registration Card, Pint of coolant (1), 1/8" Hex wrench for Gib Adjustment (1), Feed handles (3) & Feed handle knobs (3), Set screw for cutter installation (2), Safety chain (1), 7/32" Hex wrench (1), 5/32" Allen wrench (1)
IsElectric : 1
ItemName : Hougen HMD918 Two Speed Magnetic Drill 6" Depth with Pressurized Coolant System - 115V Drill Holes Up to 6" Deep, Multiple Stacked Plates or Extend Your Hole Reach Capability
ItemPackageDimensions_Height : 96.52 centimeters
ItemPackageDimensions_Length : 25.4 centimeters
ItemPackageDimensions_Width : 55.88 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-magnetic-drill-presses
Manufacturer : Hougen
Material : Metal
Material1 : Cast Iron
Material2 : Steel
MaximumChuckSize : 13 millimeters
MaximumPower : 1150 watts
MaximumRotationalSpeed : 450 rpm
ModelName : HMD918
ModelNumber : 0918102
NumberOfItems : 1
NumberOfSpeeds : 2
PackageLevel : unit
PartNumber : 0918102
PowerSourceType : Corded Electric
ProductDescription : The HMD918 includes a pressurized coolant bottle and system. The two gallon bottle easily attaches to the drill arbor and provides pressurized coolant to the cutter no matter the position of the drill. The drill includes many other standard Hougen features, such as the mag drill pilot light for low light conditions. This allows the operator to line up the hole more quickly and accurately in all lighting levels. Powering the drill is a proprietary high torque two speed Hougen motor. The two speeds help maximize tool life and increases torque when using large diameter cutters and the high torque requirement when drilling deep holes. The two stage magnet increases magnetic holding power by 30% when the drill motor is turned on. This saves energy and increases magnet life. The HMD918 has many additional features that make the drill easier to use; a new larger housing and with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a d-ring on the back of the magnet for quickly attaching the safety chain.
ProductSiteLaunchDate : 2017-06-18T07:00:00.000Z
Speed : 450 rpm
StreetDate : 2017-05-31T00:00:01Z
Style : Tool Only
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 115 volts
Wattage : 1553 watts