Cart 2 india

Specification
Brand : HayWHNKN
BulletPoint1 : 【Paramter】Voltage:110V;Power Input:1150W;Max.attraction:11000N;Rate frequency:60Hz;No-load speed:0-880rpm;Twist drill dia:13mm;Max tapping dia:M8.
BulletPoint10 : Motor Speeds: 225 - 450 RPM Variable Speed / Reverse
BulletPoint2 : 【Magnetic Base】Our magnet drill uses high-quality motors with a power of up to 1150W. Super suction magnetic seat, suction more than 11000N,side suction can be suction.The electromagnet drilling machine is with double dovetail guide rail design, high strength wear-resistant treatment, more durable.
BulletPoint3 : 【Adjustable Speed】This magnetic drill press is with infinite speed control knob, no-load speed 0-880rpm adjustable.Machine start switch, reverse and reverse switch, magnetic switch, simple operation.
BulletPoint4 : 【Precise Control】The electromagnet drilling machine is equipped with a rocker type lifting handle, can accurately control the height of the head lifting.And you can observe whether the machine is in a horizontal position by the equipped leveling device.
BulletPoint5 : 【Scope of Application】After being energized,the electromagnet of the magnetic drill base generates a magnetic field that can firmly adhere to the surface of the workpiece, achieving drilling or threading of steel plates.
BulletPoint6 : 3/4" Quick Release Arbor: Fast, Productive Cutter Change
BulletPoint7 : Lightweight: Only 29 lbs For Portability Around Job Site Or Shop
BulletPoint8 : Motor Power: 1100W
BulletPoint9 : Magnetic Strength: 3800 lb
Color : Onecolor
DrillType : drill_press
ExternallyAssignedProductIdentifier1 : 0840403740437
ExternallyAssignedProductIdentifier2 : 840403740437
Hazmat1 : MAGNETIZED MATERIAL
Hazmat10 : DE_NoAir
Hazmat11 : EG_NoAir
Hazmat12 : ES_NoAir
Hazmat13 : FR_NoAir
Hazmat14 : GB_NoAir
Hazmat15 : IN_MagnetizedMaterial
Hazmat16 : IT_NoAir
Hazmat17 : JP_NoAir
Hazmat18 : MX_MagnetizedMaterial
Hazmat19 : NL_NoAir
Hazmat2 : UN2807
Hazmat20 : PL_NoAir
Hazmat21 : SA_NoAir
Hazmat22 : SE_NoAir
Hazmat23 : SG_NoAir
Hazmat24 : TR_NoAir
Hazmat25 : US_MagnetizedMaterial
Hazmat26 : ZA_NoAir
Hazmat3 : 9
Hazmat4 : AE_NoAir
Hazmat5 : AU_NoAir
Hazmat6 : BE_NoAir
Hazmat7 : BR_MagnetizedMaterial
Hazmat8 : CA_MagnetizedMaterial
Hazmat9 : CN_MagnetizedMaterial
IncludedComponents : Drill Attachment
IsElectric : 1
ItemName : HayWHNKN Portable Magnetic Drill Mag Drill Press 110v 1150W Power Magnetic Drill Presses Electric Hole Drilling Machine Magnetic Drilling System for Metal Surface
ItemPackageDimensions_Height : 53.34 centimeters
ItemPackageDimensions_Length : 17.78 centimeters
ItemPackageDimensions_Width : 48.26 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-magnetic-drill-presses
Manufacturer : HayWHNKN
Material : Metal
MaximumPower : 1150 watts
MaximumRotationalSpeed : 0.01 degrees_per_second
ModelName : 2788-22HD12
ModelNumber : 027338
NumberOfItems : 1
PackageLevel : unit
PartNumber : 027338
PowerSourceType : Corded Electric
ProductDescription :

Suitable for steel structures, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, oil drilling platforms, power construction, railway manufacturing and other fields.

Operation Precautions

1. Insert the power plug, align the drill bit with the machining position, and then turn on the electromagnetic switch. Use a magnet to adsorb onto

the surface of magnetic materials such as steel, ensuring that there are no debris on the surface, and check if the magnetic force is normal. The

required thickness of the steel plate should be at least 6 millimeters or more on the flat surface.

2. Place the magnetic drill near the required drilling area, select suitable adsorption materials, and thread one end of the safety belt into the lifting

hole of the rack. Tie the other end to a sturdy support and thread it in with a 100mm outlet. Then tighten the bolts of the fasteners and try to pull

them with force without loosening or shifting.

3.Open the drill switch, check whether the drill is beating, the sound is smooth, if everything is normal, you can turn the handle to feed.

4. The beginning of the feed should be slow, not hard, the feed amount is generally about 0.05mm, do not exert too much force to prevent

overload.

5. If the drill suddenly stops for some reason, the power switch must be turned off immediately (please turn off the magnetic base control switch).

6. Continuous use of 2-3 hours after the need to rest for a period of time to prevent the magnetic seat due to overheating and burn out.

ProductSiteLaunchDate : 2023-10-16T05:11:33.644Z
Speed : 510 rpm
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 1100