Cart 2 india

Specification
Brand : Banfluxion
BulletPoint1 : Main Parameters: The device adopts manual pump, the range of pressure sleeve is less than 4.72in, the operating pressure is 0-63Mpa, it can withstand 30T hydraulic thrust, and the volume of pumping station is 16L
BulletPoint2 : Sturdy & Reliable: The whole of this hydraulic press sleeve machine is made of thickened steel plate, and the surface is made of special plating process, which is wear-resistant and reliable, and compared with the traditional way of replacing the tracks, it will not damage the tracks and can extend the service life of the tracks
BulletPoint3 : Portable: The press sleeve machine is equipped with manual pump, low noise, small size, more convenient to use and carry. It can ensure that the steel sleeve is intact and improve the replacement efficiency
BulletPoint4 : Easy to Operate: The equipment adopts bidirectional hydraulic device, hollow oil cylinder and lengthened screw rod length can make the piston return oil automatically, easy to operate. And it is equipped with anti-vibration hydraulic gauge, which shows clearly and accurately, indicates the pressure in all directions and effectively avoids the influence of vibration
BulletPoint5 : Scope of Application: This press sleeve machine is suitable for press fitting of various crawler type construction machinery equipment sleeve. It is a commonly used equipment in construction machinery maintenance enterprises. It is widely used in highway, railway, bridge, construction, coal mine, shipbuilding and other industries
ExternallyAssignedProductIdentifier : 6967745435396
ExternallyAssignedProductIdentifier1 : 0198462266956
ExternallyAssignedProductIdentifier2 : 198462266956
IncludedComponents : Drill Attachment
ItemName : Banfluxion Manual Track Pin Press Machine 30T Portable Excavator Sleeve Pressing Machine Track Pin Disassembly Machine with Anti-vibration Hydraulic Gauge for Tracked Excavator Maintenance
ItemPackageDimensions_Height : 15.47 inches
ItemPackageDimensions_Length : 44.37 inches
ItemPackageDimensions_Width : 13.46 inches
ItemPackageQuantity : 2
ItemTypeKeyword : power-magnetic-drill-presses
Manufacturer : Banfluxion
ModelName : LLT-PHO_1002DRCPBa6s84w
ModelNumber : WbjvkbZlgsgR-pbthABi_gVQFtv5o
NumberOfItems : 2
PartNumber : LLT-PHO_1002DRCPBa6s84w
PowerSourceType : Corded Electric
ProductDescription :

▼Function

The press sleeve machine is suitable for pressing and installing shaft sleeves of various tracked construction machinery equipment.

It is a commonly used equipment in construction machinery maintenance enterprises.

This equipment adopts a bidirectional hydraulic device to reduce oil circuits, facilitate maintenance, and operate flexibly.

▼Product Information:

Product Name: 30T Excavator sleeve pressing machine

Weight: 66.75kg

Pressure Sleeve Range: <120mm/4.72in

Screw Diameter: 40/50mm(1.57in/1.96in)

Screw Length: 1000mm/39.37in

Operating Pressure:0-63Mpa

Pump Station Volume: 16L

Note: There will be a little error in manual measurement.

This product is an ultra-high pressure manual pressure, liquid addition, and hydraulic pump.

Working medium is 46 hydraulic oil. 

When refueling, try to fill it up as much as possible to prevent the hydraulic pump from suction empty. 

When using it for the first time, fill the oil tank with hydraulic oil and press the hydraulic pump several times to clear the air inside the pump body (otherwise the pressure rod will rebound). 

When the oil pump is working, the vent tip on the vent valve or the oil tank sealing cap needs to be loosened counterclockwise, otherwise the pump will experience oil leakage.

▼Product Advantages:

Improve replacement efficiency and reduce labor intensity.

Replace the manual hammering method to ensure that the steel sleeve is intact and not damaged.

▼Item Number: 022741

30T Excavator sleeve pressing machine

ProductSiteLaunchDate : 2024-11-15T09:41:23.929Z
Size : 1550W 500RPM Single track 1Pcs
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 220 volts_of_alternating_current
Wattage : 1.5 kilowatts