Cart 2 india

Specification
Brand : Banfluxion
BulletPoint1 : Main Parameters: The equipment adopts 220V electric pump, the range of pressure sleeve is less than 4.72in, the stroke of the cylinder is 3.94in, it can withstand 70T of hydraulic thrust, and the volume of the pumping station is 16L
BulletPoint2 : Sturdy & Reliable: The whole of this hydraulic press sleeve machine is made of thickened steel plate, and the surface is made of special plating process, which is wear-resistant and reliable, and compared with the traditional way of replacing the tracks, it will not damage the tracks and can extend the service life of the tracks
BulletPoint3 : Superior Performance: The press sleeve machine adopts 1.5KW high-power pure copper motor with strong power and good stability, and the top of the casing is evenly arranged with heat dissipation holes, which has fast heat dissipation and long service life
BulletPoint4 : Easy to Operate: The equipment adopts bidirectional hydraulic device, hollow oil cylinder and lengthened screw rod length can make the piston return oil automatically, easy to operate. And it is equipped with anti-vibration hydraulic gauge, which shows clearly and accurately, indicates the pressure in all directions and effectively avoids the influence of vibration
BulletPoint5 : Scope of Application: This press sleeve machine is suitable for press fitting of various crawler type construction machinery equipment sleeve. It is a commonly used equipment in construction machinery maintenance enterprises. It is widely used in highway, railway, bridge, construction, coal mine, shipbuilding and other industries
ExternallyAssignedProductIdentifier : 6967745435396
ExternallyAssignedProductIdentifier1 : 0198462266925
ExternallyAssignedProductIdentifier2 : 198462266925
IncludedComponents : Drill Attachment
ItemName : Banfluxion 220V 1.5KW Electric Portable Sleeve Pressing Machine 70T Hydraulic Crawler Pin Pressing Machine Track Dismantling Machine with Hydraulic Gauge for Tracked Excavator Maintenance
ItemPackageDimensions_Height : 14.57 inches
ItemPackageDimensions_Length : 45.2 inches
ItemPackageDimensions_Width : 12.6 inches
ItemPackageQuantity : 2
ItemTypeKeyword : power-magnetic-drill-presses
Manufacturer : Banfluxion
ModelName : LLT-PHO_1002DRCPBa6s84w
ModelNumber : WbjvkbZlgsgR-pbthABi_gVQFtv5o
NumberOfItems : 2
PartNumber : LLT-PHO_1002DRCPBa6s84w
PowerSourceType : Corded Electric
ProductDescription :

▼Function

The press sleeve machine is suitable for pressing and installing shaft sleeves of various tracked construction machinery equipment.

It is a commonly used equipment in construction machinery maintenance enterprises.

This equipment adopts a bidirectional hydraulic device to reduce oil circuits, facilitate maintenance, and operate flexibly.

▼Product Information:

Product Name: 70T Excavator sleeve pressing machine

Rated Voltage: 220V

Rated Power: 1500W

Weight: 119.93lbs+88.63lbs

Pressure Sleeve Range: <120mm/4.72in

Screw Diameter: 40/50mm(1.57in/1.96in)

Screw Length: 1000mm/39.37in

Cylinder Stroke:100mm/3.937in

Operating Pressure:0-63Mpa

Pump Station Volume: 16L

Note: There will be a little error in manual measurement.

The product pump station is equipped with a plug.

The tank should be filled with hydraulic oil, and then powered on to start, otherwise the pump station will be damaged and pay for itself.

The pump station needs to add 46 # or 68 # anti-wear hydraulic oil by yourself.

▼Product Advantages:

Improve replacement efficiency and reduce labor intensity.

Replace the manual hammering method to ensure that the steel sleeve is intact and not damaged.

▼Item Number: 022494

70T Excavator sleeve pressing machine 220V

ProductSiteLaunchDate : 2024-11-15T09:11:41.588Z
Size : 1550W 500RPM Single track 1Pcs
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 220 volts_of_alternating_current
Wattage : 1.5 kilowatts