Cart 2 india

Specification
Brand : Consfly
BulletPoint1 : High Accuracy: Compared with traditional tool setting methods, the z axis zero setter has a mechanical dial with stable performance. It has two dials, the large one is the scale and the small one represents the cycles. The accuracy can reach 0.0004 inches and it is easy to read. It can reduce manual error and ensure the consistency of measurement results.
BulletPoint2 : Adjustable Range: The measuring height of the z axis tool setter is 2 inches and the diameter of the measuring surface is 1.02 inches, suitable for tools with a diameter of up to 1.02 inches. Its measuring surface has a range of 0 to 0.14 inches. You can turn the adjusting screw at the bottom to adjust its range, which can improve processing precision and efficiency.
BulletPoint3 : Safe Work: The measuring surface of the cnc tool setter is spring-loaded with low elasticity. It can protect the tool and effectively prevent it from being damaged or broken. There are 4 strong magnets on the bottom of the machine, so you can fix it on the metal workpiece to prevent sliding.
BulletPoint4 : With Calibration Bar: This z axis tool setter comes with a 1.97 inches metal calibration bar. Before tool setting, you can use it to press the measuring surface. Then rotate the outer ring of the dial to return the needle to zero, which is very convenient.
BulletPoint5 : With Storage Case: The z axis zero setter is equipped with a shock-resistant storage case, which makes it easy to store and move the machine. It can prevent damage to the machine and avoid inaccuracies.
BulletPoint6 : Wide Application: The cnc gauge setter can be used to measure and correct the height of the z-axis. It is not limited by the material of the workpiece, which makes it highly applicable. Suitable for horizontal CNC lathe, milling machine and other high-precision processing equipment tools.
IncludedComponents : z axis zero setter * 1; calibration bar * 1; storage case *1
ItemName : Consfly Z Axis Zero Setter CNC Tool Setter with Calibration Bar, Adjustable CNC Gauge Setter for CNC Lathe Milling Machine 0.0005” Accuracy 2” Height
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 3.94 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : magnetic-bases
Manufacturer : Consfly
MeasurementAccuracy : 0.0004 inches
ModelNumber : FBA-LLW-003
NumberOfItems : 1
PartNumber : FBA-LLW-003
ProductDescription : Specifications

Product Name: z axis zero setter
Height: 2 inches（50mm）
Accuracy: 0.0004 inches（0.01mm）
Measuring Surface Diameter: 1.02 inches（26mm）
Number of Bottom Magnets: 4 pieces
Product Weight: 1.21 pounds
Product Size: 2.05 * 2.05 * 2 inches
Packaging Weight: 1.32 pounds
Packaging Size: 3.94 * 3.94 * 2.76 inches
Application: Tool diameter ≤ 1.02 inches； Horizontal lathe, milling machine and other equipment


Usage

1. Press the calibration bar onto the standard surface of the machine. Rotate the outer ring of the dial to return the large needle to zero simultaneously.
2. Remove the calibration bar and place the machine on your workpiece.
3. Adjust the tool to contact the measuring surface of the z axis zero setter.
4. Slowly move the tool so that the both needles turn to zero at the same time, then the distance between the tool and the workpiece is 2 inches.


Notes

1. The z axis setter can only be used in the horizontal plane, not side suction or reverse suction.
2. The fixed screws at the bottom of the setter are used to fix the meter core and dial, so they should not be disassembled.


Packaging List

Z axis zero setter * 1
Calibration bar * 1
Storage case *1 
ProductSiteLaunchDate : 2024-10-11T09:24:55.166Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1