Cart 2 india

Specification
BatteriesRequired : 1
Brand : OONO
BulletPoint1 : Connect in series with any DB25 RS-232 interface for testing a serial RS-232 data link. Simple and easy, no oscilloscope is needed. DIP switch can setting disconnect or reconnect any signal, and support external probe test signal from male or female position. DB25 Connector Pin Assignment: Pin8 - DCD, Pin3 - RXD, Pin2 - TXD, Pin20 - DTR, Pin7 - GND, Pin6 - DSR, Pin4 - RTS, Pin5 - CTS, Pin22 - RI.
BulletPoint2 : 8 Bi-color (red and green) LEDs indicate the logic states for respective data lines. Green for logic HIGH and red for logic LOW. Full RS232 spec compliant with LEDs for all 8 signals: DCD, RXD, TXD, DTR, DSR, RTS, CTS, RI.
BulletPoint3 : No external power required. No driver required. Plug and play. Jack sockets(nuts) on the tester can be unscrewed easily(with metal shell held in place) if needed to mate with another connector that has jack sockets.
BulletPoint4 : OS Compatibility: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 as well as Linux and Mac OS 10.X, ect.
BulletPoint5 : Typical application scenarios: Watching the TXD and RXD LEDs either changing states or flashing to know data transferring direction: from machine to computer or from computer to machine. Verifying TXD/RXD wires should be wired crossed(swap pin2 and 3) or straight through by observing TXD and RXD LEDs at a rest state. etc...
Color : default
Color1 : green
Color2 : Red
ConnectivityTechnology1 : USB
ConnectivityTechnology2 : I2C
ConnectorType1 : HDMI
ConnectorType2 : USB 2.0
CustomerPackageType : Standard Packaging
DataTransferRate : 100 MHz
ExternallyAssignedProductIdentifier : 6954525592899
ExternallyAssignedProductIdentifier1 : 0768470325855
ExternallyAssignedProductIdentifier2 : 768470325855
IncludedComponents : No
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : RS232 DB25 Male to Female Breakout Tester LED Monitor Module
ItemPackageDimensions_Height : 11.9126 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 8.1026 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : logic-analyzers
Manufacturer : CZH-LABS
MaximumVoltage : 50 volts_of_direct_current
MeasurementAccuracy : x
MeasurementType : Voltmeter
ModelNumber : Acogedormuvdwpni1f555
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPins : 4
PartNumber : D-1479
PowerSourceType : Corded Electric
ProductDescription : 1, Connect in series with any DB25 RS-232 interface for testing a serial RS-232 data link. Simple and easy, no oscilloscope is needed. DIP switch can setting disconnect or reconnect any signal, and support external probe test signal from male or female position.
DB25 Connector Pin Assignment:
Pin8 - DCD
Pin3 - RXD
Pin2 - TXD
Pin20 - DTR
Pin7 - GND
Pin6 - DSR
Pin4 - RTS
Pin5 - CTS
Pin22 - RI
2, 8 Bi-color (red and green) LEDs indicate the logic states for respective data lines. Green for logic HIGH and red for logic LOW. Full RS232 spec compliant with LEDs for all 8 signals: DCD, RXD, TXD, DTR, DSR, RTS, CTS, RI.
3, No external power required. No driver required. Plug and play. Jack sockets(nuts) on the tester can be unscrewed easily(with metal shell held in place) if needed to mate with another connector that has jack sockets.
4, OS Compatibility: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 as well as Linux and Mac OS 10.X, ect.
5, Typical application scenarios: Watching the TXD and RXD LEDs either changing states or flashing to know data transferring direction: from machine to computer or from computer to machine. Verifying TXD/RXD wires should be wired crossed(swap pin2 and 3) or straight through by observing TXD and RXD LEDs at a rest state. Verifying it is a DTE or DCE device (and whether you need a null modem or not). Verifying whether modem controls are active, even if they're not being asserted. Testing control signal between control systems (AMX, Crestron, etc) and the devices they control. Determining if the serial connection is mated properly and if communications is occurring. Whether the wall control or the projector is malfunctioning.

ProductSiteLaunchDate : 2015-01-25T08:00:00.000Z
Size : 4-inch, 2.3-inch, 1-inch
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 9 volts
WarrantyDescription : 1