Logarithmic Detector, AD8362 2 Modes -75 DBm to 16 DBm Aluminum Alloy 50 Hz-3.8 GHz RF Power Meter for Communication

Customer rating 4.3 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹7800 -32% ₹5300/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart.
EMI and GST Invoice available.

Product Information


Specification
Brand : ANGGREK
BulletPoint : AD637 RMS Detection Module Peak Voltage Detection Output DC Voltage With Low Pass Filter Function Demo Board Module
BulletPoint1 : Wide Utility: True RMS power detection AD8362 is a power detector with true RMS response. Its measurement results are independent of the waveform and can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM, and 0FDM . It is suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS, and other broadband access devices.
BulletPoint2 : High Dynamic Range: The input dynamic range can get to 65dB, and in a 50 day system, its input can range from -75 dBm to 16 dBm. and linearity provide an accurate linear output voltage in dB, 50mV per dB.
BulletPoint3 : Controller Mode: Set a reference voltage value at the VSET end. When the power voltage value detected by AD8362 is greater than the reference voltage value, the voltage Vout outputs a high level. When the power voltage value detected by AD8362 is less than the reference voltage value, the voltage Vout uses AD8307 to measure power. The typical linear slope is 0.025V/dB, and the measurement range is -75 dBm to +16 dBm.. Equipped with shielding shell and anti reverse connection diode.
BulletPoint4 : Power Measurement Mode: The VOUT and VSET pins are directly connected, and the output voltage is proportional to the logarithm of the effective value of the input power. For every 1dB increase in the input , the output voltage Vout increases by 50 mV, up to Vs 0.1 V. The voltage reading directly reflects the power. This working mode is suitable for use as a power meter or for power detection in equipment.
BulletPoint5 : Frequency Band: The working frequency can range from 50Hz to 3.8GHz, suitable for broadband power detection, with flat input and output responses.
Color : #111
IncludedComponents : No
ItemName : Logarithmic Detector, AD8362 2 Modes -75 DBm to 16 DBm Aluminum Alloy 50 Hz-3.8 GHz RF Power Meter for Communication
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : logarithmic-amplifiers
Manufacturer : ANGGREK
ModelName : Anggrekvn7oyai9m1
ModelNumber : ANGGREKvn7oyai9m1
NumberOfItems : 1
PartNumber : ANGGREKvn7oyai9m1
ProductDescription : 1. Frequency Band: The working frequency can range from 50Hz to 3.8GHz, suitable for broadband power detection, with flat input and output responses.
2. High Dynamic Range: The input dynamic range can get to 65dB, and in a 50 day system, its input can range from -75 dBm to 16 dBm. and linearity provide an accurate linear output voltage in dB, 50mV per dB.
3. Wide Utility: True RMS power detection AD8362 is a power detector with true RMS response. Its measurement results are independent of the waveform and can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM, and 0FDM . It is suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS, and other broadband access devices.
4. Power Measurement Mode: The VOUT and VSET pins are directly connected, and the output voltage is proportional to the logarithm of the effective value of the input power. For every 1dB increase in the input , the output voltage Vout increases by 50 mV, up to Vs 0.1 V. The voltage reading directly reflects the power. This working mode is suitable for use as a power meter or for power detection in equipment.
5. Controller Mode: Set a reference voltage value at the VSET end. When the power voltage value detected by AD8362 is greater than the reference voltage value, the voltage Vout outputs a high level. When the power voltage value detected by AD8362 is less than the reference voltage value, the voltage Vout uses AD8307 to measure power. The typical linear slope is 0.025V/dB, and the measurement range is -75 dBm to +16 dBm.. Equipped with shielding shell and anti reverse connection diode.

Spec:
Item Type: RF Power Meter
Material: Aluminum Alloy
Model: AD8362
Frequency: 50Hz-3.8GHz
Dynamic Range: 65dB
Frequency Detector: -75dBm - 16dBm

How to Use:
Take out the product and connect the antenna to use.

Package List:
1 xRF Power Meter
ProductSiteLaunchDate : 2024-09-04T15:32:12.134Z
UnspscCode : 46171600

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
8
4*
4
3*
3
2*
0
1*
0

Read all 15 customer reviews

Feels premium and well-crafted.

CanÕt believe how great this is.

Happy with the quality and performance.

Does the job but nothing extraordinary.

Stunning design and excellent performance.

One of the best things IÕve ever bought.

Everything about this is perfect.

This works like a charm.

Will definitely recommend to others.

Happy with the quality and performance.

Lives up to the hype.

Quality is fine, but packaging was average.

High quality and great value.

Really liked this product, works well.

Expected a bit more for the price.

Have an opinion on this page? Let's hear it.