Cart 2 india

Specification
Brand : Generic
BulletPoint : DC 5V AD8302 Broadband Module Bandwidth Logarithmic Board Amplitude Phase Detector 2.7GHz Purple
BulletPoint1 : [ and Portable] 1.6Mm thick pcb double panel, rugged, long service life. small size and easy to carry for on-the- use.
BulletPoint2 : [Compact Design] Small size for easy portability in a bag, making it convenient for transportation.
BulletPoint3 : [Good Quality] Reliable and construction ensures long-term use and convenience.
BulletPoint4 : [Efficient Heat Dissipation] Large heat dissipation area for stable and long usage time.
BulletPoint5 : [Wide Operating Range] Ideal for rf output log detector power meter with an operating frequency from 0.1 to 440 mhz.
Color : #011
IncludedComponents : No
ItemName : Generic DC 5V AD8302 Broadband Module Bandwidth Logarithmic Board Amplitude Phase Detector 2.7GHz Purple
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemTypeKeyword : logarithmic-amplifiers
Manufacturer : Generic
Material : Copper
ModelName : Garosaiy19gcuxpo
ModelNumber : Garosaiy19gcuxpo
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : YGQ_MODULE_10579
ProductDescription : Introduction:
8302 is a phase detection circuit module, using AD8302 chip, AD8302 is used for RF / IF amplitude and phase measurement of monolithic integrated circuits, mainly by the precision matching of two broadband logarithmic detector, a phase detector, the output An group, a bias unit, and an output reference voltage buffer. It can simultaneously measure the amplitude ratio and phase difference between the two input signals from the low frequency to the 2.7 GHz frequency range and can be applied to RF / IF power s Linear ratio measurement, RF power precision control, VSWR measurement and remote system monitoring and diagnosis.
Features:
(1) The amplitude ratio (gain) and phase difference of the two input signals can be measured in the low frequency to 2. 7 GHz frequency range;
(2) When measuring the gain, the dynamic range of the two input signals is ± 30dB, the sensitivity of the output level is 30mV / dB, the error is less than 0.5dB. The output voltage corresponding to -30 dB is 30 mV, and the output voltage corresponding to +30 dB is 1.8 V. The output current is 8mA, the conversion rate is 25V / μs;
(3) the precision amplitude measurement ratio of 30mV / dB;
(4) the exact typical value is less than 0.5 dB;
(5) the exact typical value is less than 1 °;
(6) the device in operation, with measurement, control and level comparison of three working methods;
(7) with 1.8V reference voltage bias output;
(8) video bandwidth response is 30M Hz;
(9) with 2. 7V ~ 5.5V single power supply work
The technical indicators:
1, the supply voltage: 5V DC (typical current value of 20mA);
2, the dynamic range of 60 dB (-60 dBm-0 dBm) amplitude measurement accuracy 0.5DB, phase measurement accuracy of 1 °;
3, with the measurement, control and level comparison of three working methods;
4, bandwidth: LF to 2.7GHz
Instructions:
Module A, B input: access to the
ProductSiteLaunchDate : 2024-05-15T13:08:23.861Z